Owners manual

Installation Instructions

Chevy Winch Bumper

Product Number: A2750-A2752

Application: ’11 Chevy 2500-3500 HD

4. Adjust the bumper to achieve good visual alignment as follows:

1. Adjust in/out bumper alignment with mounting bracket to frame

hardware.

2. Adjust up/down and left/right alignment with bumper to

mounting bracket hardware

5. Tighten all fasteners fully; beginning with frame mounts. Then tighten all

mount-to-bumper fasteners.

6. Connect wiring harnesses to lights as shown in wiring diagram.

7. Verify proper operation of lights. Note: Turn indicators should be dim during

“running” condition and flash bright for turn.