Owners manual

Installation Instructions

Chevy Winch Bumper

Product Number: A2750-A2752

Application: ’11 Chevy 2500-3500 HD

2. Insert the provided stud plate assemblies through the back of the bumper

mount face as shown below.

Figure 10 – Stud Plate Orientation

3. Lift the bumper and carefully inert the studs into the slots on the mounting

brackets. With the bumper supported, install four nuts, washers, and lock

washers per side onto the studs. DO NOT FULLY TIGHTEN

Figure 11 – Bumper Installation