Owners manual

Installation Instructions
Chevy Winch Bumper
Product Number: A1350-A1352
Application: ’05-Current Chevy
2500-3500 HD
Copyright 2008 Fab Fours, Inc. .Page 3 of 12 A1350
II. Tools Required


Socket Wrench With
Extension


5/32” Allen Wrench


1/8” Allen Wrench


18mm Socket


3/4” Socket


3/4” Open End Wrench


7/16” Open End Wrench


3/8” Open End Wrench


7/32” Socket


Phillips Screwdriver


Hammer
III. Vehicle Preparation


A) Disconnect factory fog lamp connectors (if applicable), zip tie harness to
frame.


B) Remove fasteners holding OEM bumper to chassis using a 15mm wrench.
Fasteners may be accessed from the sides underneath and through the slots in
the OEM bumper.
Figure 1