USER MANUAL Rev 110420
WARNING Keep this manual to reference the password of your ShiftPower
Table of Contents Disclaimer 04 Contents 05 Installation 06 Operation 09 Driver Modes 09 Valet Mode 10 Lock Mode 10 ShiftPower App 11 Downloading the App 11 Connecting the Smartphone 11 Initial Menu 13 Settings 14 Troubleshooting 20 Warranty 21 03
Disclaimer Before installing ShiftPower, carefully read the operating instructions and safety information in this manual. 1. This product is designed to improve your vehicle's throttle response. By installing this device you agree to exempt ShiftPower USA and Faaftech from any responsibility when interacting with ShiftPower while driving; 2.
Contents Interface Mode button / Indicator LED Wire harness 2 Tie wrap (15cm) User Manual User manual 05
Installation Follow the instructions below to ensure that the product is installed correctly and to prevent vehicle warning lights. 1. Turn off the ignition and remove the key from inside the vehicle; 2.
3. Remove the original accelerator pedal connector, connect to the female interface connector and connect the male connector to the accelerator pedal; Original connector Mode button / Indicator LED Female connector Male connector Interface Accelerator pedal Note: Make sure that the connectors are securely locked to prevent malfunctions.
4. Choose a location on the panel, clean well and stick the Mode button / Indicator LED; Note: Use the included tie wraps to secure the module and wire harness in place to not interfere with the drivers feet or operation of the vehicle’s pedals or steering.
Operation 1. Driver Modes When the ignition is switched on, the Mode button will indicate the current driving mode through the LED illumination. To switch among driving modes, simply tap the Mode button / Indicator LED or use the ShiftPower App.
2. Valet Mode The Valet Mode limits the throttle response to 30% and can be adjusted between 15 to 45% through the ShiftPower App. To activate/deactivate the Valet mode, press and hold the Mode button until the illumination LED turns Blue (5 seconds) or through the ShiftPower App. Valet Mode Limits the acceleration 3. Lock Mode Lock mode works as an anti-theft device, canceling all throttle response.
ShiftPower App 1. Downloading the App Go to the Apple Store (iOS) or Google Play Store (Android), search for ShiftPower then click Install. Scan this QR Code to download the ShiftPower App 2. Connecting the Smartphone 1. Turn on the vehicle ignition; 2. Make sure that the smartphone Bluetooth is turned on, then open the ShiftPower App, click on and select the corresponding ShiftPower device with the one described on the interface label; Model: SP04 SW: 4.7 HW: 2.
3. Enter the password located on the interface label and at the beginning of this manual to pair the smartphone; Model: SP04 SW: 4.7 HW: 2.0 BT: ShiftPower00 Password: 528889 Batch: 2557020919 S/N: 1909020001 4.
3. Initial Menu 1 2 1 Bluetooth connection 2 Settings 3 Shows throttle response level.
4. Settings On the initial menu, touch in menu.
4.1 Mode Settings Customizes the response gain of the Dynamic, Sport, Super Sport and Race driving modes.
Throttle response ORIGINAL vs DYNAMIC RESPONSE Accelerator pedal position Throttle response ORIGINAL vs EXPONENTIAL RESPONSE Accelerator pedal position *Illustrative graphics based on a reference vehicle, with slight differences depending on the vehicle. Returns all settings to the default mode.
4.2 Vehicles View ShiftPower modules and registered vehicles. 4.3 Illumination Once activated, the Mode button / Indicator LED automatically adjusts between day and night modes. *Function available only while the smartphone is paired and ShiftPower App is running. Adjusts the brightness of the Mode button. Turn off the automatic option to adjust the brightness manually.
4.4 Safety Turning on Unlocking by Presence, ShiftPower will disable Lock mode automatically when reconnecting with the Smartphone. By turning on Maneuver by Presence, ShiftPower will disable Valet mode automatically when reconnecting with the Smartphone. Turning on the Password to Lock, ShiftPower will ask for the smartphone password or biometric confirmation to activate Lock mode.
4.5 Legal Terms View the terms of use for App and ShiftPower device. 4.6 Technical Support Displays the channels for contact if you have any questions about the operation of the product. 4.7 About View module and App information.
Troubleshooting If you are experiencing one of the problems listed below, check this guide for a quick fix. If the problem persists, contact technical support. Problem Solution After the ShiftPower is installed, the accelerator does not work and the instrument panel indicates several operating errors Check that connectors are securely locked at the accelerator pedal and the interface module The vehicle has limited acceleration Turn off valet mode.
Warranty ShiftPower USA and Faaftech guarantees its customers a period of 03 (three) years against defects in raw material and manufacturing, proven by presenting the respective invoice from the reseller to the consumer and this Warranty Certificate duly completed, observing the following: 1.
FCC ID: 2AXLF-SHIFTP This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
www.ShiftPowerUSA.com Technical Support Support@ShiftPowerUSA.