Datasheet

Aluminium Electrolytic Capacitors

6. Quality

6.1 Certification

Quality is the main reason of our success. Without ignoring the importance of price of course, customers choose and

remain with FTCap to satisfy their needs for top quality capacitors. It is therefore our pledge to continue producing and

delivering top quality capacitors as efficiently as possible.

In addition to our commitment to quality, we are also committed to a healthy environment. That is why each and every

one of our employees, from top management down to the workshop, accepts his or her environmental responsibilities and

strives to work as effectively and efficiently as possible.

Intermediate testing is carried out through the entire production process in addition to the 100% final testing of each

capacitor before shipment. All of our employees know that quality is the top priority for our customers. Workers participate

in the process of continued improvement, quite often by anticipating. The result is uninterrupted flow production.

FTCap is certified according to DIN ISO 9001 : 2000. The company certificate is available on the ftcap website

www.ftcap.de.

7. Safety Precautions

7.1 Charged Capacitors

Electrolytic capacitors may store high amounts of energy (especially photo flash and high voltage capacitors).

To avoid electrical shocks and sparks always discharge electrolytic capacitors before handling.

For higher voltage it is recommended to shorten the terminals during handling.

7.2 Misapplication

Explosions of electrolytic capacitors may occur if the capacitor is exposed to

reverse voltage above specified limit

voltage above specified limit

ripple currents above specified limit

ambient temperatures above specified limit

high mechanical impact

7.3 Operating electrolytes

Principally operating electrolytes used in FTCap products doesn’t contain dangerous substances. However, in rare

exceptional cases it is necessary to use certain substances to achieve certain physical chemical or electrical properties.

In these cases the concentration is reduced to an absolute minimum.

Generally the following safety hints should be respected using operating electrolytes:

Avoid skin and eye contact.

With electrolyte moistened skin parts are to be cleaned immediately with sufficient flowing water.

Eyes must be rinsed at least 15 min under flowing cold water. Visit physician immediately with complaints.

Inhale from electrolyte steam or nebulas has to be avoided. Work area must be well ventilated.

Cloths witch came into contact with electrolyte should be washed or cleaned.

7.4 ROHS

All FTCap products are full compliant with the RoHS Directive 2005/618/EC.

Our products are declared as ,,RoHS compliant"

and on the packaging label as "According to RoHS"

7.5 Disposal

Aluminium Electrolytic Capacitors can be disposed or recycled. The disposal rules are governed by the national and local

authorities and had to be taken into consideration. The European Waste Code No. is 160214

BACK TO INDEX

BACK TO START