Datasheet

ManualsBrandsF&T ManualsAluminium Electrolytic CapacitorsElectrolytic Capacitor 100uF, 500mA, 350V, -10 ... 30 %

Electroyltic Capacitors Film Capacitors

Summary of content (129 pages)

PAGE 1
Electroyltic Capacitors Film Capacitors
PAGE 2
PAGE 3
Aluminium Electrolytic Capacitors Index 1.1.
PAGE 4
Aluminium Electrolytic Capacitors GENERAL INFORMATION ...................................................................................................................................................................... 3 1. CONSTRUCTION OF ALUMINIUM ELECTROLYTIC CAPACITORS ............................................................................................................ 3 2. DIFFERENT TYPES OF FOIL .................................................................................................
PAGE 5
Aluminium Electrolytic Capacitors GENERAL INFORMATION F&T Kondensatoren GmbH has been a manufacturer of capacitors since 1948. Many years of experience, continuous research & development and the latest state of the art production machinery guarantees products of the highest quality.
PAGE 6
Aluminium Electrolytic Capacitors Fig.2 shows a cross section of the winding. Anode foil CA Oxide layer Paper CK Cathode foil Electrolyte Fig. 2 If two capacitors are connected in series, the total capacitance results from the relationship CG=CA*CK/(CA+CK). If CA << CK it follows CG CA. ( aspired normal case) This means the anode capacitance determines the capacitance of the whole capacitor ( the cathode foil decreases the capacitance only somewhat).
PAGE 7
Aluminium Electrolytic Capacitors 3. Parameter 3.1 Rated voltage The rated voltage (UR) is the voltage the capacitor is designed for. This voltage may be applied continously to the capacitor over the full temperature range. 3.2 Surge voltage The Surge voltage may be applied to the capacitors only for a short time. UR 315 V : US =1,15 * UR ( 5 times 1 min per hour) UR > 315 V : US =1,1 * UR ( 5 times 1 min per hour) 3.
PAGE 8
Aluminium Electrolytic Capacitors 3.8 ESR The equivalent series resistance represents the losses of a capacitor (the resistance of the foil, electrolyte, terminals). The ESR depends on frequency and temperature. 3.9 ESL The equivalent series inductance represents the inductive part of the capacitor (leads, foil). The ESL depends mainly on the frequency. 3.
PAGE 9
Aluminium Electrolytic Capacitors Thermal Model UDC + UAC Tc I~2 Ths R*c_hs Kc * R*c_a PL = ESR * C*cap I~ ESR R*h_c Th Khs * R*hs_a 5.
PAGE 10
Aluminium Electrolytic Capacitors 6. Quality 6.1 Certification Quality is the main reason of our success. Without ignoring the importance of price of course, customers choose and remain with FTCap to satisfy their needs for top quality capacitors. It is therefore our pledge to continue producing and delivering top quality capacitors as efficiently as possible. In addition to our commitment to quality, we are also committed to a healthy environment.
PAGE 11
A 85°C Series A Axial terminals Low mounting height High CV product Long life 5000 h @ 85 °C RoHS compliant REACH compliant Features All contacts welded High CV product Welded axial leads High reliability Different case sizes, voltages and capacitance combinations are available on request. Also in small lots. Applications HiFi Industrial Tube amplifier General specifications Items Characteristics 4,7… 82.
PAGE 12
A 85°C Electrical data and ordering code for series A BACK TO INDEX BACK TO START Rated voltage Rated cap. UR [V] CR [µF] 16 25 40 63 2200 3300 4700 4700 5600 8200 8200 10000 12000 18000 33000 47000 56000 82000 1200 1800 2700 3300 3300 4700 4700 5600 6800 10000 18000 27000 33000 47000 560 1000 1500 1800 1800 2200 2200 3300 3900 5600 10000 15000 22000 27000 330 470 680 820 Case size Typ.
PAGE 13
A 85°C Rated voltage Rated cap. UR [V] CR [µF] 160 250 350 400 270 330 560 1000 1500 1800 2700 33 56 82 100 100 150 150 180 220 390 680 820 1200 1800 22 33 47 56 56 68 68 100 120 220 330 470 680 820 18 27 39 47 Case size Typ.
PAGE 14
A 85°C Useful life life Useful as a function of ambient temperature and actual ripple current as a function of ambient temperature and actual ripple current 3 2,5 2 1,5 1 0,5 0 30 35 40 45 50 55 60 65 70 75 80 85 90 BACK TO INDEX BACK TO START 12
PAGE 15
AH 105°C Series AH Axial terminals Low mounting height High CV product Long life 3000 h @ 105 °C RoHS compliant REACH compliant Features All contacts welded High ripple current Welded axial leads High reliability Different case sizes, voltages and capacitance combinations are available on request. Also in small lots. Applications HiFi Industrial Telecommunications General specifications Items Characteristics 10 … 82.
PAGE 16
AH 105°C Electrical data and ordering code for series AH BACK TO INDEX BACK TO START Rated voltage UR [V] 16 25 40 63 Rated Case size Typ. ESR Ripple cap.
PAGE 17
AH 105°C Rated voltage UR [V] 160 250 350 Rated Case size Typ. ESR Ripple cap.
PAGE 18
AH 105°C Useful life life Useful as a function of ambient temperature andactual actual ripple current as a function of ambient temperature and ripple current 3 2,5 2 1,5 1 0,5 0 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 BACK TO INDEX BACK TO START 16
PAGE 19
AG 125°C Series AG Axial terminals Low mounting height High CV product Long life 2000 h @ 125 °C Low temperature –55°C RoHS compliant REACH compliant Features All contacts welded High temp 125°C Long useful life Different case sizes, voltages and capacitance combinations are available on request. Also in small lots. Applications Automotive Inverter/drives Laser Industrial General specifications Items Characteristics Rated capacitance range CR 150… 82.
PAGE 20
AG 125°C Electrical data and ordering code for series AG BACK TO INDEX BACK TO START Rated Rated cap. Case size Typ.
PAGE 21
85°C ATBI ATBI Axial terminals Bipolar construction For crossover networks RoHS compliant REACH compliant Features All contacts welded Bipolar Different case sizes, voltages and capacitance combinations are available on request. Also in small lots.
PAGE 22
ATBI 85°C Electrical data and ordering code for series ATBI Rated voltage UR [V] 23 Vac @ 50 Hz 35 Vac @ 50 Hz Rated capacitance (other values available on request) CR [µF] 1,0 2,2 3,3 4,7 6,8 10 15 22 33 47 68 100 220 330 470 560 680 880 1000 1,0 2,2 3,3 4,7 6,8 10 15 22 33 47 68 100 220 Case size Order code D x L [mm] ATBI...
PAGE 23
ATBIG 85°C ATBIG Axial terminals Bipolar construction Plain foil For crossover networks RoHS compliant REACH compliant Features All contacts welded Bipolar Different case sizes, voltages and capacitance combinations are available on request. Also in small lots.
PAGE 24
ATBIG 85°C Electrical data and ordering code for series A Rated voltage Rated capacitance Case size Order code CR [µF] D x L [mm] ATBIG...
PAGE 25
GM 85°C Screw terminals High CV product Long life 8000 h @ 85°C GM RoHS compliant REACH compliant Features All internal contact welded High capacitance High CV product Low inductance ESL Different case sizes, voltages and capacitance combinations are available on request. Also in small lots. Applications Computer Inverter/drives Traction Welding General specifications Items Characteristics 390 … 3.300.000 µF Rated capacitance range CR Capacitance tolerance 20% Max.
PAGE 26
GM 85°C Drawings for series GMA and GMB a +0,5 a +0,5 h +0,5 h +0,5 L±2 L±2 B D D Fig 2: GMB for stud mounting Fig1: GMA for ring clamp mounting Dimensions and mechanical data dimensions, case with insulation sleeve D [mm] 35 40 50 65 75 90 case length L available in 5 mm [mm] 40 … 120 40 … 120 40 … 120 40 … 180 40 … 230 40 … 230 h connecting terminals a mounting stud, GMB only max. torque B max.
PAGE 27
GM 85°C Electrical data and ordering codes series GM BACK TO INDEX BACK TO START Rated voltage UR [V] 16 25 Rated cap. CR [µF] 82000 120000 120000 150000 150000 180000 180000 180000 220000 220000 270000 270000 390000 470000 560000 820000 820000 1000000 1200000 1500000 1800000 2200000 2200000 2700000 3300000 33000 47000 47000 56000 68000 82000 68000 82000 68000 100000 120000 120000 150000 180000 270000 330000 330000 390000 560000 560000 820000 820000 Case size Typ.
PAGE 28
GM 85°C Rated voltage UR [V] 63 80 100 Rated cap. CR [µF] 180000 220000 220000 270000 330000 390000 6800 8200 10000 12000 12000 15000 15000 15000 18000 18000 22000 22000 27000 39000 47000 68000 68000 82000 100000 120000 150000 180000 180000 220000 270000 3300 4700 4700 5600 5600 6800 6800 8200 10000 10000 12000 12000 15000 18000 22000 27000 33000 39000 Case size Typ.
PAGE 29
GM 85°C Rated voltage UR [V] 250 350 400 Rated cap. CR [µF] 15000 18000 18000 27000 27000 27000 39000 39000 680 1000 1000 1200 1200 1500 1500 1500 1800 1800 2200 2200 2700 3900 4700 5600 6800 6800 8200 10000 12000 15000 15000 18000 18000 560 680 820 1000 1000 1200 1200 1200 1500 1500 1800 1800 2200 3300 3900 5600 Case size Typ.
PAGE 30
GM 85°C Rated voltage UR [V] Rated cap. CR [µF] 500 3300 3900 4700 5600 6800 8200 10000 10000 15000 15000 Case size Typ.
PAGE 31
85°C GMX GMX Screw terminals High CV product Long life 12000 h @ 85°C RoHS compliant REACH compliant Features All internal contact welded High capacitance High CV product Long useful life Different case sizes, voltages and capacitance combinations are available on request. Also in small lots. Applications Computer Industrial Inverter/drives Laser General specifications Items Characteristics Rated capacitance range CR Capacitance tolerance Rated voltage range UR Surge voltage US Max.
PAGE 32
GMX 85°C Drawings for series GMXA and GMXB a +0,5 a +0,5 h +0,5 h +0,5 L±2 L±2 B D D Fig 2: GMXB for stud mounting Fig1: GMXA for ring clamp mounting Dimensions and mechanical data Dimensions, case with insulation sleeve D [mm] 35 40 50 65 75 90 Case length L available in 5 mm [mm] 40 … 120 40 … 120 40 … 120 40 … 180 40 … 230 40 … 230 Connecting terminals Mounting stud, GMXB only h a Thread Max. torque B Max.
PAGE 33
GMX 85°C Electrical data and ordering codes series GMX BACK TO INDEX BACK TO START Rated voltage UR [V] 16 25 Rated cap. CR [µF] 82000 120000 120000 150000 150000 180000 180000 180000 220000 220000 270000 270000 390000 470000 560000 820000 820000 1000000 1200000 1500000 1800000 2200000 2200000 2700000 3300000 22000 33000 33000 39000 47000 56000 56000 56000 68000 68000 68000 82000 120000 120000 180000 220000 270000 270000 390000 470000 560000 680000 Case size Typ.
PAGE 34
GMX 85°C Rated voltage UR [V] 63 80 100 Rated cap. CR [µF] 120000 150000 180000 180000 220000 270000 3900 5600 6800 6800 8200 8200 8200 10000 12000 12000 15000 15000 18000 22000 27000 39000 39000 47000 68000 68000 100000 120000 120000 150000 150000 3300 4700 4700 5600 5600 6800 6800 8200 10000 10000 12000 12000 15000 18000 22000 27000 33000 39000 Case size Typ.
PAGE 35
GMX 85°C Rated voltage UR [V] 250 350 400 Rated cap. CR [µF] 12000 18000 18000 27000 27000 27000 39000 39000 560 680 820 1000 1200 1200 1500 1500 1800 1800 1800 2200 2700 3300 3900 4700 5600 5600 8200 8200 12000 12000 15000 18000 18000 390 560 560 680 820 820 1000 1000 1200 1200 Case size Typ.
PAGE 36
GMX 85°C Useful life Useful as a function of ambient temperature and actual ripple current as a function of ambient temperature and actual ripple current 3 2,5 2 1,5 1 0,5 0 30 35 40 45 50 55 60 65 70 75 80 85 90 Ripple current and ESR Ripple current and ESR As a function of frequency f as a function of frequency f 1,5 I~ / I rated 1,3 1,1 0,9 ESR / ESR 100Hz 0,7 0,5 10 100 1000 10000 100000 BACK TO INDEX BACK TO START 34
PAGE 37
G 105°C G Screw terminals High CV product Long life 8000 h @ 105° RoHS compliant REACH compliant Features All internal contact welded High performance High ripple current Long useful life Different case sizes, voltages and capacitance combinations are available on request. Also in small lots. Applications Industrial Inverter/drives Telecommunications Laser General specifications Items Characteristics 390 … 3.300.000 µF Rated capacitance range CR Capacitance tolerance Max.
PAGE 38
G 105°C Drawings for series GA and GB a +0,5 a +0,5 h +0,5 h +0,5 L±2 L±2 B D D Fig 2: GB for stud mounting Fig1: GA for ring clamp mounting Dimensions and mechanical data Dimensions, case with insulation sleeve D [mm] 35 40 50 65 75 90 Case length l available in 5 mm [mm] 40 … 120 40 … 120 40 … 120 40 … 180 40 … 230 40 … 230 Connecting terminals Mounting stud, GB only h a Thread Max. torque B Max.
PAGE 39
G 105°C Electrical data and ordering codes series G BACK TO INDEX BACK TO START Rated voltage UR [V] 16 25 Rated cap. CR [µF] 82000 120000 120000 150000 150000 180000 180000 180000 220000 220000 270000 270000 390000 470000 560000 820000 820000 1000000 1200000 1500000 1800000 2200000 2200000 2700000 3300000 22000 33000 33000 39000 47000 56000 56000 56000 68000 68000 68000 82000 120000 120000 180000 220000 270000 270000 390000 470000 560000 680000 Case size Typ.
PAGE 40
G 105°C Rated voltage UR [V] 63 80 100 Rated cap. CR [µF] 120000 150000 180000 180000 220000 270000 3900 5600 6800 6800 8200 8200 8200 10000 12000 12000 15000 15000 18000 22000 27000 39000 39000 47000 68000 68000 100000 120000 120000 150000 150000 3300 4700 4700 5600 5600 6800 6800 8200 10000 10000 12000 12000 15000 18000 22000 27000 33000 39000 Case size Typ.
PAGE 41
G 105°C Rated voltage UR [V] 250 350 400 Rated cap. CR [µF] 12000 18000 18000 27000 27000 27000 39000 39000 560 680 820 1000 1200 1200 1500 1500 1800 1800 1800 2200 2700 3300 3900 4700 5600 5600 8200 8200 12000 12000 15000 18000 18000 390 560 560 680 820 820 1000 1000 1200 1200 Case size Typ.
PAGE 42
G 105°C Useful life Useful life as a function of ambient temperature andactual actual ripple current as a function of ambient temperature and ripple current 3 2,5 2 1,5 1 0,5 0 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 BACK TO INDEX BACK TO START 40
PAGE 43
GG 125°C Screw terminals GG Very long lifetime High CV product High-temp 125°C Low inductance ESL Low temperature – 55°C RoHS compliant REACH compliant Features All internal contact welded High temp 125°C Long useful life Low inductance ESL Different case sizes, voltages and capacitance combinations are available on request. Also in small lots. Applications Computer Industrial Inverter/drives Welding General specifications Items Characteristics 3.900 … 330.
PAGE 44
GG 125°C Electrical data and ordering code for series GG / For drawing see GA / GB BACK TO INDEX BACK TO START Rated voltage UR [V] Rated cap. Case size Typ.
PAGE 45
Special electrolyte GF 85°C Non flammable electrolyte Screw terminals High CV product Long life 8000 h @ 85°C GF RoHS compliant REACH compliant Features All internal contact welded Self distinguishing electrolyte High capacitance High reliability Different case sizes, voltages and capacitance combinations are available on request. Also in small lots.
PAGE 46
Special electrolyte GF 85°C Drawings for series GFA and GFB a +0,5 a +0,5 h +0,5 h +0,5 L±2 L±2 B D D Fig 2: Version GFB for stud mounting Fig1: Version GFA for ring clamp mounting Dimensions and mechanical data Dimensions, case with insulation sleeve D [mm] 35 40 50 65 75 90 h [mm] 6 5 5 5 5 5 a [mm] 13 18 22 28,5 31,7 31,7 Connecting terminals Thread M5 M5 M5 M5 M 5, M 6 M6 Mounting stud, GFB only Max.
PAGE 47
Special electrolyte GF 85°C Electrical data and ordering code GF series BACK TO INDEX BACK TO START Rated voltage UR [V] 350 400 Rated cap. Case size Typ.
PAGE 48
Special electrolyte GF 85°C Useful life life Useful as a function of ambient temperature andactual actual as a function of ambient temperature and rippleripple currentcurrent 3 2,5 2 1,5 1 0,5 0 30 35 40 45 50 55 60 65 70 75 80 85 90 BACK TO INDEX BACK TO START 46
PAGE 49
105°C GW Screw terminals High performance Ultra low inductance Heat sink mounting ! Very high ripple current RoHS compliant REACH compliant GW Features All contacts welded High ripple current Thermal conducting pad Best suited for heatsink mounting Different case sizes, voltages and capacitance combinations are available on request. Also in small lots.
PAGE 50
GW 105°C Drawings for series GW L±1 L üA ± 1 h a ± 0,5 i x ØD±1 S1 ± 0,2 S2 ± 0,2 Fig1: Version GW for ring clamp mounting Dimensions and mechanical data Connecting terminals D [mm] 50 75 90 h [mm] 5 5 5 a [mm] 22 31,7 31,7 x [mm] 4,5 4,5 4,5 Thread i [mm] 20 20 20 M5 M 5, M 6 M6 Max.
PAGE 51
GW 105°C Electrical data and ordering codes series GW Rated voltage UR [V] 40 63 100 160 Rated cap. Case size CR [µF] 56000 100000 180000 150000 220000 27000 47000 82000 82000 120000 12000 22000 39000 39000 47000 56000 4700 8200 15000 15000 22000 Typ.
PAGE 52
SI 85°C Standard series SI: snap in, 2 pins SI4P: snap in, 4 pins RoHS compliant REACH compliant SI Features All internal contact welded High CV product High reliability Long useful life Different case sizes, voltages and capacitance combinations are available on request. Also in small lots. Applications HiFi Computer Inverter/drives General specifications Items Characteristics Rated capacitance range CR 56 … 330.
PAGE 53
SI 85°C Drawings for series SI and SI4P SI SI4P L ±1 D-0 +1 h -0 +1 Piercing diagram h = 6,3 / 4,5 mm 10 ±0,1 Fig 2: SI4P: keyed polarity 4 pin snap in version (here with 6,3 mm claw, the 4,5 mm claw is also available). Case diameter 35 , 40, 45 mm only Ø 2 ±0,1 Fig 1: SI : Standard 2 pin snap in version and mounting hole dimensions (mm) Case diameter 25 to 45 mm only Mounting hole dimensions (mm) NC terminals must be soldered to isolated pads or pads connected to the minus potential.
PAGE 54
SI 85°C Electrical data and ordering code for series SI/SI4P BACK TO INDEX BACK TO START Rated voltage Rated cap. Case size Typ.
PAGE 55
SI 85°C Rated voltage Rated cap. Case size Typ.
PAGE 56
SI 85°C Rated voltage Rated cap. Case size Typ.
PAGE 57
SI 85°C Rated voltage Rated cap. Case size Typ.
PAGE 58
Useful life life Useful as a function of ambient temperature andactual actual ripple current as a function of ambient temperature and ripple current 3 2,5 2 1,5 1 0,5 0 30 35 40 45 50 55 60 65 70 75 80 85 90 BACK TO INDEX BACK TO START 56
PAGE 59
SIH 105°C Ultra compact design Long life time SIH: snap in, 2 pins SI4PH: snap in, 4 pins RoHS compliant REACH compliant SIH Features All internal contact welded High CV product High reliability Ultra compact Different case sizes, voltages and capacitance combinations are available on request. Also in small lots. Applications HiFi Computer Industrial Tube amplifier General specifications Items Characteristics Rated capacitance range CR 68 … 150.
PAGE 60
SIH 105°C Drawings for series SIH and SI4PH SIH SI4PH L ±1 D-0 +1 h -0 +1 Piercing diagram h = 6,3 / 4,5 mm 10 ±0,1 Fig 2: SI4PG: keyed polarity 4 pin snap in version (here with 6,3 mm claw, the 4,5 mm claw is also available). Case diameter 35 , 40, 45 mm only Ø 2 ±0,1 Fig 1: SIG : Standard 2 pin snap in version and mounting hole dimensions (mm) Case diameter 25 to 45 mm only Mounting hole dimensions (mm) NC terminals must be soldered to isolated pads or pads connected to the minus potential.
PAGE 61
SIH 105°C Electrical data and ordering code for series SIH BACK TO INDEX BACK TO START Rated voltage UR [V] 16 25 Rated cap.
PAGE 62
SIH 105°C Rated voltage UR [V] 63 80 Rated cap. CR [µF] 2700 2700 3300 3300 3900 3900 3900 4700 4700 5600 6800 8200 10000 10000 12000 12000 15000 18000 18000 22000 22000 27000 680 820 1200 1200 1500 1500 1800 1800 2200 2200 2200 2200 2700 2700 2700 3300 3300 3900 4700 5600 5600 5600 6800 6800 10000 10000 12000 12000 Case size Typ.
PAGE 63
SIH 105°C Rated voltage UR [V] 160 250 350 Rated cap. CR [µF] 2200 2700 3300 3300 3900 3900 4700 5600 5600 6800 180 220 270 330 390 390 470 470 560 560 560 680 680 820 820 820 1000 1200 1200 1500 1500 1800 1800 1800 2700 2700 2700 3300 3300 4700 100 120 180 180 180 220 270 270 330 330 Case size Typ.
PAGE 64
SIH 105°C Rated voltage UR [V] 450 Rated cap. CR [µF] Case size Typ.
PAGE 65
SIG 125°C High reliabilty Long lifetime at 125°C SIG: snap in, 2 pins SI4PG: snap in, 4 pins RoHS compliant REACH compliant SIG Features All internal contact welded High temp 125°C High CV product High performance Low temperature Different case sizes, voltages and capacitance combinations are available on request. Also in small lots. Applications Automotive Consumer Industrial Tube amplifier General specifications Items Characteristics 1.200 … 130.
PAGE 66
SIG 125°C Drawings for series SIG and SIG4P SIG SI4PG L ±1 D-0 +1 h -0 +1 Piercing diagram h = 6,3 / 4,5 mm 10 ±0,1 Fig 2: SI4PG: keyed polarity 4 pin snap in version (here with 6,3 mm claw, the 4,5 mm claw is also available). Case diameter 35 , 40, 45 mm only Ø 2 ±0,1 Fig 1: SIG : Standard 2 pin snap in version and mounting hole dimensions (mm) Case diameter 25 to 45 mm only Mounting hole dimensions (mm) NC terminals must be soldered to isolated pads or pads connected to the minus potential.
PAGE 67
SIG 125°C Electrical data and ordering codes series SIG Rated Rated cap. Case size voltage UR [V] 16 25 CR [µF] 10000 15000 18000 18000 27000 39000 39000 47000 82000 82000 100000 120000 130000 6800 10000 15000 15000 18000 27000 27000 39000 47000 56000 68000 68000 100000 Ripple current IR~ 100 Hz, D x L [mm] 100 Hz, 125°C [A] 20°C [mΩ] 25x30 30x30 25x50 35x30 30x50 30x70 35x50 40x50 35x80 40x80 45x80 40x100 45x100 25x30 30x30 25x50 35x30 30x50 30x70 35x50 40x50 35x80 45x80 40x80 40x100 45x100 Typ.
PAGE 68
125°C SIG Useful life life Useful as a function of ambient temperature andactual actual ripple current as a function of ambient temperature and ripple current 3 2,5 2 1,5 1 0,5 0 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 66
PAGE 69
GS 85°C DIN series PCB solder pins RoHS compliant REACH compliant GS Features All internal contact welded High CV product High reliability Long useful life Different case sizes, voltages and capacitance combinations are available on request. Also in small lots. Applications HiFi Consumer Industrial Inverter/drives General specifications Items Characteristics Rated capacitance range CR 56 … 330.
PAGE 70
GS 85°C Drawings and mounting pin layout of the series GS capacitors D 25 mm can diameter -0 +1 2,5 mm - 10±0,1 L ±2 + 3x 1,3 mm 12,5±0,1 4,5 ±0,5 component side 40 mm can diameter 30 / 35 mm can diameter 2,5 mm 2,5 mm - 20±0,1 15±0,1 + + 4x 5x 1,3 mm 1,3 mm 10±0,1 17,5±0,1 20±0,1 7,5±0,1 17,5±0,1 component side component side Fig 1: Dimensions of the series GS and mounting hole layouts for D = 25 … 40 mm NC terminals must be soldered to isolated pads or pads connected to the min
PAGE 71
GS 85°C Electrical data and ordering code for series GS BACK TO INDEX BACK TO START Rated voltage UR [V] 16 25 Rated cap. Case size Typ.
PAGE 72
GS 85°C Rated voltage UR [V] 63 80 100 Rated cap. Case size Typ.
PAGE 73
GS 85°C Rated voltage UR [V] 200 350 400 Rated cap. Case size Typ.
PAGE 74
GS 85°C Rated voltage Rated cap. Case size Typ. ESR Ripple current IR~ UR [V] CR [µF] 500 270 390 470 390 560 560 680 D x L [mm] 100 Hz, 100 Hz, 85°C 20°C [mΩ] [A] 35x40 35x45 30x70 35x50 35x60 40x50 35x80 354 245 203 245 171 171 141 1,2 1,5 1,8 1,6 2,0 2,0 2,5 Order code Rated voltage GS... UR [V] CR [µF] 500 680 820 820 1200 820 1200 1500 27150035040 39150035045 47150030070 39150035050 56150035060 56150040050 68150035080 Rated cap. Case size Typ.
PAGE 75
105°C GSH DIN series Ultra compact design Long life time PCB solder pins RoHS compliant REACH compliant GSH Features All internal contact welded High CV product High reliability Ultra compact Different case sizes, voltages and capacitance combinations are available on request. Also in small lots. Applications HiFi Computer Industrial Tube amplifier General specifications Items Characteristics Rated capacitance range CR 68 … 150.
PAGE 76
GSH 105°C Drawings and mounting pin layout of the series GSH capacitors D 25 mm can diameter -0 +1 2,5 mm - 10±0,1 L ±2 + 3x 1,3 mm 12,5±0,1 4,5 ±0,5 component side 40 mm can diameter 30 / 35 mm can diameter 2,5 mm 2,5 mm - 20±0,1 15±0,1 + + 4x 5x 1,3 mm 1,3 mm 10±0,1 17,5±0,1 20±0,1 7,5±0,1 17,5±0,1 component side component side Fig 3: Dimensions of the series GSH and mounting hole layouts for D = 25 … 40 mm NC terminals must be soldered to isolated pads or pads connected to the
PAGE 77
GSH 105°C Electrical data and ordering code for series GSH BACK TO INDEX BACK TO START Rated voltage Rated cap.
PAGE 78
GSH 105°C Rated voltage Rated cap.
PAGE 79
GSH 105°C Rated voltage Rated cap.
PAGE 80
GSG 125°C Useful life life Useful as a function of ambient temperature and actual ripple current as a function of ambient temperature and actual ripple current 3 2,5 2 1,5 1 0,5 0 40 45 50 55 60 65 70 75 78 80 85 90 95 100 105 110
PAGE 81
125°C GSG DIN series High reliability Long lifetime at 125°C PCB solder pins RoHS compliant REACH compliant GSG Features All internal contact welded High temp 125°C High CV product High performance Low temperature – 55°C Different case sizes, voltages and capacitance combinations are available on request. Also in small lots. Applications HiFi Automotive Consumer Traction General specifications Items Characteristics 1.200 … 130.
PAGE 82
GSG 125°C Drawings and mounting pin layout of the series GSG capacitors D 25 mm can diameter -0 +1 2,5 mm - 10±0,1 L ±2 + 3x 1,3 mm 12,5±0,1 4,5 ±0,5 component side 40 mm can diameter 30 / 35 mm can diameter 2,5 mm 2,5 mm - 20±0,1 15±0,1 + + 4x 5x 1,3 mm 1,3 mm 10±0,1 17,5±0,1 20±0,1 7,5±0,1 17,5±0,1 component side component side Fig 1: Dimensions of the series GSG and mounting hole layouts for D = 25 … 40 mm NC terminals must be soldered to isolated pads or pads connected to the
PAGE 83
GSG 125°C Electrical data and ordering codes series GSG Rated voltage UR [V] 16 25 Rated cap. Case size Typ.
PAGE 84
FTCAP 125°C GSG Useful life life Useful as a function of ambient temperature and actual ripple current as a function of ambient temperature and actual ripple current 3 2,5 2 1,5 1 0,5 0 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 82
PAGE 85
LF 85°C Standard series Photoflash Solder lug pins RoHS compliant REACH compliant LF Features All contacts welded Soldering lug terminals High capacitance Long useful life Different case sizes, voltages and capacitance combinations are available on request. Also in small lots. Applications HiFi Consumer Industrial Telecommunications General specifications Items Characteristics Rated capacitance range CR 56 … 330.
PAGE 86
LF 85°C Drawings for series LFHA and LFHB LFA LFB a a h h ±2 ±2 L L B D +1 D Fig 1: Version LFA for clamp mounting D [mm] 25 30 35 40 50 h [mm] 10 10 10 10 10 a [mm] 10 10 10 20 20 Thread Mounting Mounting M 8 M 12 +1 Fig 2: Version LFB for stud mounting B M 8 x 12 M 8 x 12 M 8 x 12 M 8 x 12 M 12 x 16 Max.
PAGE 87
LF 85°C Electrical data and ordering code for series LF BACK TO INDEX BACK TO START Rated voltage Rated cap. UR [V] CR [µF] 16 25 22000 27000 39000 33000 39000 47000 39000 47000 56000 56000 56000 68000 68000 82000 100000 82000 120000 150000 120000 150000 180000 220000 180000 270000 270000 330000 10000 12000 15000 15000 18000 18000 18000 22000 18000 27000 27000 22000 27000 33000 39000 39000 47000 56000 56000 68000 Case size Typ.
PAGE 88
LF 85°C Rated voltage Rated cap. UR [V] CR [µF] 63 80 100 12000 15000 18000 18000 22000 22000 22000 27000 27000 39000 1800 1800 2700 2700 3300 3900 3300 3900 3900 4700 4700 5600 5600 6800 6800 8200 10000 10000 12000 12000 18000 15000 18000 22000 22000 27000 1200 1500 1800 1800 2200 2200 2200 2700 2700 2700 3300 3300 Case size Typ.
PAGE 89
LF 85°C 1500 35x40 Rated voltage Rated cap. Case size UR [V] CR [µF] 200 350 400 1800 1800 2200 2200 3300 2700 3300 3900 4700 3900 5600 5600 6800 180 220 270 270 330 330 390 390 390 470 470 560 560 560 680 820 820 1000 1200 1200 1500 1500 1800 1800 2200 2700 180 180 220 270 270 330 330 330 390 390 64 2,8 Typ.
PAGE 90
LF 85°C 180 220 30x35 25x50 Rated voltage Rated cap. Case size UR [V] CR [µF] 500 220 180 270 270 270 270 390 470 531 434 0,8 1,0 Typ. ESR Ripple current IR~ D x L 100 Hz, 20°C 100 Hz, 85°C [mm] [mΩ] [A] 30x40 35x30 30x45 35x35 30x50 35x40 35x45 30x70 434 531 354 354 354 354 245 203 1,0 0,9 1,1 1,1 1,2 1,2 1,5 1,8 18150030035 22150025050 390 35x50 Rated voltage Rated cap.
PAGE 91
LFH 105°C Ultra compact design Photoflash Solder lug pins RoHS compliant REACH compliant LFH Features All contacts welded Soldering lug terminals High reliability Stud mounted Different case sizes, voltages and capacitance combinations are available on request. Also in small lots. Applications Laser Welding Tube amplifier Telecommunications General specifications Items Characteristics Rated capacitance range CR 68 … 150.
PAGE 92
LFH 105°C Drawings for series LFHA and LFHB LFHA LFHB a a h h ±2 ±2 L L B D +1 D Fig 1: Version LFHA for clamp mounting D [mm] 25 30 35 40 50 Mounting Mounting h [mm] 10 10 10 10 10 a [mm] 10 10 10 20 20 Thread M 8 M 12 +1 Fig 2: Version LFHB for stud mounting B M 8 x 12 M 8 x 12 M 8 x 12 M 8 x 12 M 12 x 16 Max.
PAGE 93
LFH 105°C Electrical data and ordering code for series LFH BACK TO INDEX BACK TO START Rated voltage UR [V] 16 25 Rated cap.
PAGE 94
LFH 105°C Rated voltage UR [V] 63 80 100 Rated cap.
PAGE 95
LFH 105°C Rated voltage UR [V] 250 350 400 Rated cap.
PAGE 96
LFH 105°C Usefullife life Useful as a function of ambient temperature actual ripple current as a function of ambient temperature and and actual ripple current 3 2,5 2 1,5 1 0,5 0 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 BACK TO INDEX BACK TO START 94
PAGE 97
S/SZ 85°C Central mounting SZ: Double capacitance 85°C RoHS compliant REACH compliant S/SZ Features All contacts welded Central mounting Soldering lug terminals High mechanical stability Different case sizes, voltages and capacitance combinations are available on request. Also in small lots. Applications Industrial Tube amplifier SMPS General specifications Items Characteristics Rated capacitance range CR 22 … 22.
PAGE 98
S/SZ 85°C Drawings for series S and SZ S SZ D D L±2 L±2 12 12 M18x1,5 M18x1,5 All dimensions in mm Case = Minus Electrical data and ordering code for series S Rated voltage UR [V] 16 25 40 63 100 160 250 Rated cap. CR [µF] 10000 22000 2200 4700 10000 22000 1000 2200 4700 10000 470 1000 2200 4700 10000 220 470 1000 2200 100 220 470 1000 100 220 470 Case size DxL [mm] Typ. ESR tan Ripple current IR~ 100 Hz, 20°C 100 Hz, 20°C max.
PAGE 99
S/SZ 85°C Useful Useful life life as a function of ambient temperature and actual as a function of ambient temperature and actual rippleripple currentcurrent 3 2,5 2 1,5 1 0,5 0 30 35 40 45 50 55 60 65 70 75 80 85 90 BACK TO INDEX BACK TO START 97
PAGE 100
SH 105°C Central mounting RoHS compliant REACH compliant SH Features All contacts welded Central mounting Soldering lug terminals High reliability Different case sizes, voltages and capacitance combinations are available on request. Also in small lots. Applications HiFi Signalization Industrial General specifications Items Characteristics 22 … 22.
PAGE 101
SH 105°C Drawings for series SH SH D L±2 12 M18x1,5 All dimensions in mm Electrical data and ordering code for series SH Rated voltage UR [V] Rated cap. CR [µF] Case size 16 10000 22000 2200 4700 10000 22000 1000 2200 4700 10000 470 1000 2200 4700 10000 220 470 560 30 x 40 35 x 54 25 x 40 25 x 40 30 x 54 35 x 54 25 x 40 25 x 40 30 x 40 35 x 54 25 x 40 25 x 40 25 x 40 30 x 54 35 x 70 25 x 40 25 x 40 25 x 40 25 40 63 100 DxL [mm] Typ.
PAGE 102
SH 105°C Usefullife life Useful as a function of ambient temperature actual ripple current as a function of ambient temperature and and actual ripple current 3 2,5 2 1,5 1 0,5 0 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 Ripple current and ESR Ripple current and ESR As a function of frequency f as a function of frequency f 1,5 I~ / I rated 1,3 1,1 0,9 ESR / ESR 100Hz 0,7 0,5 10 100 1000 10000 100000 BACK TO INDEX BACK TO START 100
PAGE 103
MDK RoHS compliant REACH compliant MDK Features Insulated aluminium can Protection according to IP 54 Connection cable Double potted design VDE approval for selected products Different case sizes, voltages and capacitance combinations are available on request. Also in small lots. Applications Motorstart Whitegood motorcontrol General specifications Items Characteristics Clima category 10/060/21 Tolerance 10% Specs.
PAGE 104
MDK Drawings for series MDK 30 mm 8 mm L± 3 mm 300 mm D±1 mm Standard Values Type MDK UR ~ 50-60 Hz CR [V] [µF] 160 V~ 320 V~ 10 0 12 5 14 0 16 0 18 0 20 0 25 0 30 0 35 0 40 0 45 0 50 0 85 0 70 80 90 10 0 12 5 14 0 16 0 DC DC @50 @60 Hz Hz Dx L [%] [mm] 1,70 % 1,70 % 1,70 % 1,70 % 1,70 % 1,70 % 1,70 % 1,70 % 1,70 % 1,70 % 1,70 % 1,70 % 1,70 % 0,55 % 0,55 % 0,55 % 0,55 % 0,55 % 0,55 % 0,55 % [%] 1,36 % 1,36 % 1,36 % 1,36 % 1,36 % 1,36 % 1,36 % 1,36 % 1,36 % 1,36 % 1,36 % 1,36 % 1,36 % 0,44
PAGE 105
MEK RoHS compliant REACH compliant MEK Features With cap and connecting cable or plug in tags With clamp attachment or mounting stud Cable outcomming radial or axial VDE approval for selected products Different case sizes, voltages and capacitance combinations are available on request. Also in small lots. Applications Motorstart Whitegood motorcontrol General specifications Items Characteristics Clima category 10/060/21 Tolerance 10% Specs.
PAGE 106
MEK L± 3 mm Drawings for series MEK D±1 mm Standard values type MEK UR ~ 50-60 Hz CR DC* DC* @50 @60 Hz Hz D x L / with cap [V] [µF] [%] [%] [mm] 320 V~ 10 15 20 25 30 40 50 60 70 80 90 100 125 140 160 180 200 1,70 % 1,70 % 1,70 % 1,70 % 1,70 % 1,70 % 1,70 % 1,70 % 1,70 % 1,70 % 1,70 % 1,70 % 1,70 % 1,70 % 1,70 % 1,70 % 1,70 % 1,36 % 1,36 % 1,36 % 1,36 % 1,36 % 1,36 % 1,36 % 1,36 % 1,36 % 1,36 % 1,36 % 1,36 % 1,36 % 1,36 % 1,36 % 1,36 % 1,36 % 35x51 / 70 35x66 / 85 35x66 / 85 35x66 / 85 35x
PAGE 107
Photoflash/ Pulse capacitors E-Type Pulse and Photoflash capacitors Outstanding charge-discharge characteristic High reliability A, SI, LF and G Terminals available RoHS compliant REACH compliant E-Type Features All contacts welded Charge/discharge proof High CV product High flash frequencies Different case sizes, voltages and capacitance combinations are available on request. Also in small lots.
PAGE 108
Photoflash/ Pulse capacitors E-Type Overview of common photoflash capacitors and pulse capacitors Photoflash capacitors are specially adapted to the application. Hence, the following overview includes only some examples of possible capacitance / voltage / dimension - combinations. For further information please contact our technical service.
PAGE 109
Accessory equipment Accessory equipment Accessory Insulating disks and nuts 25 18 Insulation disc for stud M8 10 mm mounting hole Order code I 8 – 10 8 Insulation disc for stud M8 18 mm mounting hole Order code I 8 – 18 25 8 10 1 1,5 1 2 30 18 Mounting example 12 Insulation disc for stud M12 18 mm mounting hole Order code I 12 – 18 1 1,5 ØD Material PAG ULVO Ø17 ± 0,3 h 1 Nylon cap nuts HM 8 HM 12 D 25 mm 30 mm h 15 mm 17,5 mm 6 for stud M8 : order code HM 8 for stud M12 : order
PAGE 110
Accessory equipment Discharge / Balancing Resistor Resistor for discharge and / or voltage balancing. Suitable for can diameter 65 / 75 / 90 mm Other values on request Rated Voltage Temp. range Tolerance Resistance 21±1 max.
PAGE 111
Film Capacitors Index 1.1.
PAGE 112
Film Capacitors TERMINAL DESIGNS Terminal Terminal Design PCB Pins, radial Terminal Design Solder lugs New: Elo-Pins PCB Pins Axial leaded Screw terminals / threaded studs Screw terminals on ceramic bushing Screw terminals / internal thread Direkt busbar connection Screw terminals / internal thread Faston connection Screw terminal / internal thread Direct IGBT-connection BACK TO INDEX BACK TO START 110
PAGE 113
JC Joule Cap RoHS compliant REACH compliant JC Features Greatest Capacitance/Voltage product in smallest size package Box construction facilitates high density PCB layout Low inductance achieved by horizontal layering of capacitor elements Different voltages and capacitance combinations are available on request. Also in small lots.
PAGE 114
JC Electrical data and ordering code for series JC Un Cn [Vdc] 500 600 750 900 1000 1200 1500 Heigth Max. ESR Max. Irms [A] @10kHz @10kHz/30°C Rth Weigth Part No.
PAGE 115
PL Power Link RoHS compliant REACH compliant PL Features Different voltages and capacitance combinations are available on request. Also in small lots. General specifications Items Characteristics 6 … 65 µF Capacitance Range 700 … 1500 Vdc Rated Voltage DC Available Tolerance ±5% (J) or ±10% (K) Rated RMS Current @ 30 °C max.
PAGE 116
PL Electrical data and ordering code for series PL Un [Vdc] 700 900 110 0 130 0 150 0 Cn Dimensions Pitch Max. ESR dU/dt Max. Irms Ipeak Energy Rth Weigth Part No.
PAGE 117
CX Coax Cap RoHS compliant REACH compliant CX Features Self-healing Temperatur range -25 °C to 85 °C Usable in high duty cycles with higher currents Optimized bottom side cooling by achieving plain bottom surface Applications High Power Very low Inductance Medium-High Frequency Power Electronics Different terminals, voltages and capacitance combinations are available on request. Also in small lots.
PAGE 118
CX Electrical data and ordering code for series CX Un Cn Un Heigth Max.
PAGE 119
CC Castor Cap RoHS compliant REACH compliant CC Features Compact design Controlled self-healing process Designed for printed circuit board mounting Different voltages and capacitance combinations are available on request. Also in small lots.
PAGE 120
CC Electrical data and ordering code for series CC Un Cn Max. ESR dU/dt Max. Irms @10kHz Ipeak Part No. @10kHz/30°C [Vdc] [µF] [mOhm] [V/µs] [A] [A] 600 32 3,4 24 30 753 CC32µ600d… 700 25 4,1 26 30 656 CC25µ700d… 750 20 4,6 29 30 578 CC20µ750d… 900 17 4,8 32 30 549 CC17µ900d… 1000 13 5,5 37 30 481 CC13µ1000d… 1100 10 6 42 30 424 CC10µ1100d… 1200 8,5 6,8 46 30 389 CC8.5µ1200d… 1300 7,5 7,1 49 30 368 CC7.
PAGE 121
EC Energy Cap RoHS compliant REACH compliant EC Features Robust design Aluminum Case Stud mounting Long lifetime Applications Laser Industrial High voltage power supplies Baggage scanners Railway Different terminals, case sizes, voltages and capacitance combinations are available on request. Also in small lots. General specifications Items Characteristics Capacitance Range 200 … 3300 µF 700 … 1500 Vdc Rated Voltage DC Available Tolerance ±10% (K) Rated RMS Current @ 30 °C Max.
PAGE 122
EC Electrical data and ordering code for series EC Un Cn [Vdc] [µF] 850 1400 1500 1700 2100 2600 3300 550 920 1000 1150 1500 1700 2200 420 610 680 770 1000 1150 1400 260 430 480 540 670 820 1000 190 320 360 400 500 610 750 700 900 1100 1300 1500 Diameter Heigth Max.
PAGE 123
MKP R Motor Cap RoHS compliant REACH compliant MKPr Features VDE approval Radial pins Long life time Applications Motor run General purpose AC application Medium low power switching General specifications Items Characteristics 0,47 … 15 µF ; 0,1 … 8 µF Capacitance range Rated voltage AC 250 V; 400 V Available tolerance ± 10 % Operating temperature range -25 °C … +85 °C Climatic category DIN IEC 68/1 25/085/21 Class B BACK TO INDEX BACK TO START 121
PAGE 124
MKP R Electrical data and ordering code for series MKP R (radial) UN CN Dimensions B [VAC] 250 400 H pitch [mm] [µF] 0,47 0,56 0,68 0,82 1 1,2 1,5 1,8 2 2,2 2,7 3 4 5 6 8 10 12 15 0,1 0,15 0,22 0,27 0,33 0,39 0,47 0,56 0,68 0,75 0,82 1 1,2 1,5 1,8 2 2,2 2,7 3 4 5 6 8 L Pulse load capacity 7,5 7,5 9 10 11,5 11,5 11,5 18 18 18 14,5 14,5 16 26,5 26,5 26,5 44,5 44,5 44,5 6 7,5 7,5 9 10 10 10 11,5 11,5 13 13 14,5 14,5 14,5 16 16 16 26,5 26,5 26,5 26,5 35,5 35,5 15,8 15,8 17,5 18,3 19,8 19,8 19,8 22,
PAGE 125
MKP A Motor Cap RoHS compliant REACH compliant MKP A Features Axial Wrapped with foil Tin-plated copper Applications Motor run General purpose AC application Medium low power switching adhesive wire leads General specifications Items Characteristics Capacitance range Rated voltage AC Available tolerance 0,47 … 33 µF 0,47 … 8 µF 0,1 … 5 µF 125 V 250 V 400 V 5 % / 10 % -25 °C … +85 °C Operating temperature range Climatic category DIN IEC 68/1 25/085/21 BACK TO INDEX BACK TO START 123
PAGE 126
MKP A Electrical data and ordering code for series MKP A (axial) UN CN Dimmension B [VAC] 125 250 400 Order code H L [mm] [µF] 0,47 1 1,5 2,2 3,3 4,7 6,8 8,2 10 13 15 18 22 30 33 0,47 0,56 0,68 0,82 1 1,2 1,5 1,8 2 2,2 2,7 3 4 5 6 8 0,1 0,15 0,22 0,27 0,33 0,39 0,47 0,56 0,68 0,75 0,82 1 1,2 1,5 1,8 2 2,2 2,7 3 4 5 4,5 6,5 8 9 12 14 16 18 19 20 22 23 26 26 28 6 6,5 7,5 8,5 10 10,5 11 14 14 14,5 12,5 13,5 16 19 20 22,5 5 5,5 7 7,5 8 8 9 10 10 12 12,5 10,5 11,5 13 13 14 15 18 19 23,5 24 11 13 15
PAGE 127
Custom-made Film Capacitors Intermediate-circuit Film Capacitor for direct busbar connection Items Characteristics Capacitance 1000 µF Rated voltage DC 800 V Available tolerance ± 10 % Rated RMS current 60 Arms Pulse rise time Operating temperature range Climatic category DIN IEC 68/1 10,2 V/µs -40 °C … +70 °C 40/070/21 1 High voltage Film Capacitor with terminals on ceramic bushing Items Characteristics Capacitance 0,1 µF Rated voltage DC 14 kV Rated voltage AC 4,6 kV Available toler
PAGE 128
Custom-made Film Capacitors Film Capacitor for DC-link applications with mounting clamps for bottom side cooling Items Characteristics Capacitance 550 µF Rated voltage DC 1100 V Available tolerance ± 10 % Max.
PAGE 129
Custom-made Film Capacitors High voltage Film Capacitor with low ESR and flat construction Items Characteristics Capacitance 100 pF Rated voltage DC 25 kV Rated voltage AC 12 kV Available tolerance ± 10 % Operating temperature range Climatic category DIN IEC 68/1 Component assembly Film Capacitors Items 25/050/21 Characteristics Capacitance Rated voltage DC 1200 µF 63 V Available tolerance ± 10 % Max.