Owners manual

ManualsBrandsF-S Electronics ManualsMP3 Player Accessories1W Rangemaster Long Range FM Transmitter …

F-S Electronics 2018

1W Adjustable Output

Bluetooth FM Transmitter

COMMON SENSE RULES FOR ALL USERS

1. The AC adapter supplied is designed for dry indoor use only. DO NOT use the AC adapter outdoors or in wet conditions. Shock injuries may occur.

2. Make sure the supplied antenna is connected at all times when transmitter unit is powered ON. This will prevent permanent damage to your unit.

3. For best results, try to find an open (unused) frequency to transmit on (http://www.radio-locator.com). Do not transmit on any occupied commercial radio

station frequency; for legal and ethical reasons. Refer to FCC guidelines for further guidance on proper frequency selection and operation.

4. Always follow your local regulations regarding the proper use of an FM transmitter. Most city, county, state governments provide a civil code online.

Contact local neighborhood association for rules on transmitter use within neighborhood (not all property is regulated by a neighborhood association).

5. Only use power adapters supplied with your unit. Using other types of power adapters may produce background noise with your transmitted audio and/or

could damage your unit. Contact your Fail-Safe distributor to purchase a replacement power adapter if yours becomes damaged or lost.

6. When transmitting from a microphone: only use a stereo plug microphone, using any other type of microphone such as a mono plug microphone will

permanently damage your unit; do not place microphone close to speakers due to resulting feedback (which may cause damage to transmitter).

7. Always ensure that proper antenna tuning methods were used. Placement of antenna is key to transmission quality. Inform yourself…this is only a guide.

8. Always disconnect Bluetooth when leaving the proximity of the unit. Leaving Bluetooth active may inhibit reconnecting or connecting other devices.

9. Do not set volume control to maximum (10) setting for initial adjustments. Start mid range (4-6) and adjust higher or lower as needed for quality.

10. Transmitter must be off when the memory card is inserted into the transmitter. Inserting card while transmitter is on may make transmitter inoperable.

This also applies to removing the memory card while power to the unit is on. Best practice is to only attach, insert, or remove while your unit is off.

FM Radio Transmission is a very tedious task and many variables factor into how clear your signal will be for any receiver. FS Electronics has made this unit

as “Plug and Play” ready as possible for customers. Proper operation still requires some basic knowledge of electronics and radio frequency transmission.

SPECIFICATIONS

Power supply: DC12V Modulate Style: WFM

Maximum operating current: >400mA Maximum Deviation: ±75KHz

Ambient temperature: -10~40℃ Parasitic AM: 〈0.2%

Frequency Range: 76MHz~108MHz Audio Frequency Response: 50Hz~15000Hz

Frequency Step: 100KHz Audio input level: -15dbV（Max: -30dbV）

Frequency Stabilize Style: PLL Stereo Separation： Better than 40db

Pre-emphasize: Default 50µs (Optional 75µs) SNO Rate： Less than 60db

Output power: 0 to 1 W adjustable (11 settings) Antenna Connector： TNC type

Output resistance: 50 OHM Audio Output: Mono or Stereo

Line-In Jacks: RCA (left & right) jacks Source Options: Card, Line-In, or Bluetooth

MIC input Level: -15dbV（Max: -45dbV） Product Dimension: 162x120x40mm

MIC Jack： 3.5mm headphone connector Packing Weight: 0.99kg

Microphone Distortion: less than 0.2% Battery (internal): lithium ion (~4hrs)

Summary of content (4 pages)

PAGE 1
W Adjustable Output Bluetooth FM Transmitter COMMON SENSE RULES FOR ALL USERS 1. The AC adapter supplied is designed for dry indoor use only. DO NOT use the AC adapter outdoors or in wet conditions. Shock injuries may occur. 2. Make sure the supplied antenna is connected at all times when transmitter unit is powered ON. This will prevent permanent damage to your unit. 3. For best results, try to find an open (unused) frequency to transmit on (http://www.radio-locator.com).
PAGE 2
GETTING FAMILIAR WITH THE FSX-01C FRONT PANEL 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Display Screen Volume Control Play/Pause (Press and hold: Power On/Off) Decrease/Previous/Down Increase/Next/Up Transmit Power Control Microphone Volume Control Audio Source Selection Frequency Selection Mono/Stereo Selection (Press and hold: Pre-emphasis) LCD SCREEN 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
PAGE 3
OPERATOR’S GUIDE ALWAYS PHYSICALLY INSPECT YOUR TRANSMITTER BEFORE USE ; CHECK FOR ANY DAMAGE OR CORROSION. Make sure that you have the Insert the AC Adapter into the unit proper antenna attached and then you can HOLD down the before inserting AC Adapter. ANTENNA BEFORE On/Off button to initiate power. ATTACHING POWER WARNING! CARD LINE BLUETOOTH Press the Audio button DO NOT insert/remove card Enable source device, to select the audio source. while power is applied.
PAGE 4
BRIEF INTRODUCTION TO FCC AND SOME FINAL THOUGHTS A brief introduction to the rules of the FCC and your FM Transmitter It is the policy of FS Electronics, that knowing and observing the lawful use of all transmitters is a first responsibility of our end users. We do not endorse any unlawful use of any of our transmitters, and we try to give you as much common sense help about normal and lawful use as we can.