Owner Manual

Choosing an Oven

Function

Convection Steam Oven

User Manual

Using Descale Mode

Water used during any steam mode may result in limescale or other buildup inside the

oven cavity, water tank, or water hoses. Once your steam oven has reached 100 hours of

steam-related operation, the Descaling Reminder icon will appear on the LCD panel. The

light will stay on until the Descale mode has been run completely.

There are 3 separate stages to the descaling process. The user will need to change the

water in the tank before each phase. It will also be necessary to empty the drip tray

underneath the front of the oven each time you change the water in the water tank.

A descaling solution (e.g. white vinegar) will be required during descaling.

If the steam oven door is opened before the stage is complete the descaling operation

will be interrupted and you must start over from the beginning. Please wait until each

stage is complete before opening the oven door.

Description Water Tank ContentsStage Time

500ml water, 50ml descaling solution

550ml water

55ml water

Descaling

Descaling Rinse

Rinse

30 mins

10 mins

1. Fill the water tank with 550ml water and 50ml descaling agent.

2. From the home screen, enter the Oven Function screen, navigate to Descale, and press .

3. Instead of displaying the default temp and time, the LCD panel will display a number

1-3 to indicate which stage of descaling the oven is on. Press to start that stage.

4. After each stage is complete empty the water tank and drip tray then reﬁll the water

tank with the correct contents for that stage.

5. After re-installing the water tank and shutting the oven door the steam oven will start

the next stage of the descaling process.

6. Repeat steps 4 and 5 for stage 3 of the descaling process.

7. Once stage 3 is complete the right side of the LCD panel will display “End” and give a

beeping sound. Empty the water tank and drip tray then re-install. Descaling is complete

for another 100 hours!