User's Manual

46
When the Barred Dial mode is enabled, the person using the
phone cannot call numbers in the barred dial list. To call a barred
number, you must enter the PIN2 to disable the barred dial mode.
If the SIM card does not have PIN2, it will not support the Barred
Dial feature.
Change Password
To change the password, input the current password, and then
enter the new password.
Note: The initial password is “0000.” After you change your
password, you will need to input the password. If you
forgot your password, contact the service center.
10.7 Pen Setup
In case of the failure to operate Touch Point, the user can adjust
the coordinates for optimal use.
10.8 Bluetooth
10.8.1 Bluetooth Mode
To connect this phone to other Bluetooth device, set this option to
On.
icon will appear on the idle screen.
The phone’s Bluetooth power will be turned on, until you turn the
Bluetooth Mode off. When you turn off your phone’s power, and
turn on the next time, the Bluetooth power will be On. If the
Bluetooth device was connected, the phone will connect to the