User's Manual

30
Incoming Calls.
You can also cancel all call barring settings. You will be able to make and
receive calls normally.
You can set and change the call barring password obtained from your
service provider using this option. You must enter the current password
before you can specify a new one.
Note:
The phone sends your settings to the network and the network returns
the acknowledgement. You can deactivate all call barring settings by
selecting the Cancel All.
Call Time Reminder
You can set the call time reminder. Options are Off, Single, and Periodic.
Call Time Display
If you want, you can set the phone to display the call time.
Call Background Sound
You can set the background sound when you make call. You can adjust
the volume and the repeat settings. The available sounds are Motorcycle,
Sidewalk, MRT1, MRT2, Restaurant, Pub, Chord, Alarm, Dou and White
Noise. Also you can add the background sound.
Auto Redial
This option allows you to set redial automatically when the call receiver is
busy. If you set [Auto Redial] on, it will redial 10 times to make a call.
IP Number
Set the IP number.
10.5 Network Setup
Network Setup helps you in Network Selection, selection of Preferred
Network, and GPRS connection
Network Selection
The Network Selection feature enables you to select automatically or
manually the network used when roaming outside of your home network.
Note:
You can select a network other than your home network only if it has
a valid roaming agreement with your home network.
Options are as following:
1) Automatic: You will be connected to the first available network when
roaming
2) Manual: The phone scans for the available network, and you can select
the network manually.
Preferred Networks
You can set your preferred networks from PLMN list.
You can Add From List, Create New, Change Priority and Delete
Band Selection
This menu allows you to select the service bandwidth to 900, 1800, 1900,
Dual Band and Auto.
GPRS Connection
Press [Change] soft key (left) to change the setting for the GPRS
connection.
It will switch and save the GPRS connection to set on:
1) When Needed.
2) Always
10.6 Security Setup
Use this menu to protect the phone against unauthorized use by managing
the several access codes of your phone and SIM card.
There are six types of security setting categories, and you can optimize
security mode by choosing sub menus in “Security Setup” in “Settings”
menu. These security settings will help you to keep privacy and to prevent
other people from using the phone without your permission.
Note:
If you enter an incorrect PIN/PIN2 three times in succession, the SIM
card is blocked. To unblock it, you need to enter your PUK/PUK2. The
codes are supplied by your network operator.
PIN Lock
When the PIN Lock feature is on, the phone only works when you enter
PIN code for the SIM card. If you turn on the phone with the SIM card, the
phone will ask for the password. Once the correct password is entered,
the phone will work with the SIM card.
Phone Lock
When the Phone Lock feature is on, user must enter the password each
time you turn on the phone. Making a call or operating the phone is not
available without the password.
Auto Keypad Lock
To prevent unwanted accidental key presses, you can use this auto