User's Manual

83
To use Bluetooth headset, set Bluetooth Mode to
On and select ‘Search Audio Device’ or ‘My
Device’ then select the device.
Note: It requires pass code to use a Bluetooth
device. Please refer to the Bluetooth device
manual for detail.
4.6.1 Bluetooth Mode
To connect this phone to other Bluetooth device,
set this option to On.
icon will appear on the idle screen.
The phone’s Bluetooth power will be turned on,
until you turn the Bluetooth Mode off. When you
turn off your phone’s power, and turn on the next
time, the Bluetooth power will be On. If the
Bluetooth device was connected, the phone will
connect to the device when the phone’s power is
back on.
Note: When you are not using the Bluetooth
feature, set the Bluetooth Mode to Off, in order to
save the battery power.
4.6.2 Search Audio Dev
This option will search for Audio device(s) within
the range of your phone.
1) Put the device nearest possible when you
search a new device.
2) Check to turn on your phone and the new
device. For turning on your new device, see
instruction provided by the device
manufacturer. Make sure your phone is in
Bluetooth Mode.
3) Select “Search Audio Device” to find the
new device.
4) After your phone finds the device, press
[Pair] soft key (left), it might ask for a pass
code. Default pass code is depending on