User's Manual Part 2

General Functions
Making a Call
To make a call on your phone, check the phone if
the screen is idle and the phone indicates signal.
Then key-in the area code and phone number
using the numeric keys and press the Send Key.
If you set the Connect tone to ON, you will hear
the connecting tone when the call is answered by
the caller. For details, please refer to 4.
Settings>1.Phone Setup >1.Sound & Light.
Making an International Call
Press the * key twice to display “+” character.
Input the country code, area code (without the
leading zero), and the phone number. Then press
the Send Key. The ‘
+’ informs the network that it is
the international call.
Correcting the Number
Area Displays
The last digit
displayed
Press the [Clear] soft key
(right).
Any other digit
in the number
Press the Right & Left
navigation key until the cursor
is exactly to the right of the
digit to erase.Press the [Clear]
soft key (right).
The whole
display
Hold down the [Clear] soft key
(right) for more than two
seconds.
Entering a “Pause or Wait”
You may enter a pause (“P”) character into a dial
string by pressing the left special function key *
three times. Press the left special function key *
four times to enter a wait (“W”) character into a dial
string.
20