User's Manual

35
Note: The initial password is “0000.” After you change your password,
you will need to input the password. If you forgot your
password, contact the service center.
5. Bluetooth
To connect this phone to other Bluetooth device, set this option to On.
icon will appear on the idle screen. The phone’s Bluetooth power
will be turned on, until you turn the Bluetooth Mode off. When you turn
off your phone’s power, and turn on the next time, the Bluetooth power
will be On. If the Bluetooth device was connected, the phone will
connect to the device when the phone’s power is back on.
Note: When you are not using the Bluetooth feature, set the
Bluetooth Mode to Off, in order to save the battery
power.
Inquiry Audio Device
This option will search for Audio device(s) within the range of your phone.
• Put the device nearest possible when you search a new device.
• Check to turn on your phone and the new device. For turning on your
new device, see instruction provided by the device manufacturer.
Make sure your phone is in Bluetooth Mode.
• Select “Search Audio Device” to find the new device.
• After your phone finds the device, press [Pair] soft key (left), it might
ask for a pass code. Default pass code is depending on the Bluetooth
device. You might try 0000 as a pass code. Usually the Bluetooth
audio device provides a guide with this pass code.
• The phone and device will be paired and connected. If you fail this pair
procedure, try again or contact the device manufacturer, or change to
other device.