User's Manual

13
Press the [*] key twice to display “+” character.
Input the country code, area code (without the leading zero), and the
phone number. Then press the Send Key. The “+” informs the network
that it is an international call.
2. Enter the “Pause or Wait”
You may enter a pause (“P”) character into a dial string by pressing the [*]
three times.
Press the [*] four times to enter a wait (“W”) character into a dial string.
3. Activate or deactivate the “Silent mode”
To activate the “Silent Mode” option, press and hold [#] key in the idle
mode.
Display
Icons
Signal Strength: Shows the strength of the receiving signal.
Greater the number of bars, stronger the signal strength.
GPRS: Shows the strength of the receiving GPRS signal.
Greater the number of bars, stronger the signal strength.
Roaming: Appears when the phone is roaming.
Missed Calls: Appears when there is missed call(s).
New Message: Appears when a new incoming text message
is received and is unread.
MMS Unread: Appears when a new MMS message is arrived
and unread.
MMS Busy: Appears when MMS is busy, while receiving and
sending a message.
Broadcast Message: Appears when Broadcast Message
receive mode is active..