Cov lus qhia

How To Use Ezy AnchorEzy

INSTALLATION:

1. Take your cordless drill or impact driver

2. Connect the Torx driver bit to the drill/driver and secure in

the chuck

3. Pick up your Ezy Anchor with screw in position through the

Ezy Anchor

4. Connect your guy rope to the hook

5. Hold the guy rope and hook together with your guiding hand

6. Pick up the drill and driver in your driving hand

7. Insert the Torx driver into the head of the screw

8. Place drill in forward drilling position

9. Commence drilling the screw downward into the earth

keeping the EzyAnchor parallel to the earth so the screw

penetrates at its set angle.

10. Installation complete

Should you strike a solid object whilst installing the screw, remove

and reposition the screw to another position close to or adjacent to

the original required position.

REMOVAL:

More information https://www.caravansplus.com.au

PAGE 1
How To Use Ezy AnchorEzy INSTALLATION: 1. Take your cordless drill or impact driver 2. Connect the Torx driver bit to the drill/driver and secure in the chuck 3. Pick up your Ezy Anchor with screw in position through the Ezy Anchor 4. Connect your guy rope to the hook 5. Hold the guy rope and hook together with your guiding hand 6. Pick up the drill and driver in your driving hand 7. Insert the Torx driver into the head of the screw 8. Place drill in forward drilling position 9.
PAGE 2
1. With your drill in hand and Torx driver bit connected and secured within your drill chuck connect the Torx bit driver to the screw head. 2. Hold the hook and guy rope in one hand, place drill in reverse and screw out. 3. Removal complete * In the event of a flat battery you can connect a shifting spanner to the driver bit shaft and unscrew manually to a point where you can remove the screw from the ground. ** Remember to regularly charge your drill or impact driver battery.