User guide

PDA Client Installation
Step 1: Connect PDA device to the PC.
Step 2: Insert the installation CD, Run Setup.exe from the CD-ROM directory/PDAClient to install PDA Client.
Note: If you do not have Microsoft® ActiveSync installed, a message will appear “Cannot find
ActiveSync, install ActiveSync and run installation again”.
Step 3: Check that the client application is installed completely in PDA device.
Smart Phone Client Installation
Step 1: Connect Smart Phone device to the PC.
Step 2: Insert the installation CD, Run Setup.exe from the CD-ROM directory/SPClient to install Smart Phone
Client.
Note: If you do not have Microsoft® ActiveSync installed, a message will appear “Cannot find
ActiveSync. Please reinstall ActiveSync and then run this installation again.”
Step 3: Check the client application is installed completely in smart phone device.