02026323, A
COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd.. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as “EZVIZ”). This user manual (hereinafter referred to as “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of EZVIZ.
APPLICABLE LAW. EZVIZ SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE LATTER PREVAILS. Regulatory Information FCC Information This device complies with Part 15 of the FCC Rules.
EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the Radio Equipment Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union.
- Scan the QR code on the body of the camera. - Follow the EZVIZ app wizard to finish Wi-Fi configuration. You can also select wired connection. Step 1: connect the camera to the router with a network cable. Step 2: add the camera to EZVIZ app by scanning its QR code. N3 Network Cable Hold the RESET button for 5 seconds when camera is running if either adding cameras or Wi-Fi connection fails.
Step 3 Camera Installation You can install the camera on the wall or ceiling. Make sure the wall is strong enough to withstand three times the weight of the camera. 1 Install the Camera - Place drill template onto the surface you have chosen to mount the camera. - (For the cement wall/ceiling only) Drill screw holes according to the template, and insert three expansion screws. - Use three metal screws to fix the camera base according to the template.
Adjusting Screw 0°-90° 0°-360° Appendix Box Content Internet Camera x1 Mounting Template x1 Power Adapter x1 Screw Kit x1 Waterproof Kit x1 4 Quick Start Guide x1
Basics MIC MicroSD Card Slot RESET Speaker LED Indicator Name MIC Speaker LED Indicator Description For audio in. For audio out. • Solid Red: Camera is starting up. • Slow-Flashing Red: Wi-Fi connection has failed. • Fast-Flashing Red: Device exception (e.g. MicroSD card error). • Solid Blue: Video is being viewed or played back in EZVIZ App. • Fast-Flashing Blue: Camera is ready for the Wi-Fi connection. • Slow-Flashing Blue: Camera is running properly.
Troubleshooting Q: “The device is offline.” or “The device is not registered.” prompts when adding the camera by EZVIZ app. A: 1. Make sure the network, that the camera is connceted to, is normal and the DHCP of router is enabled. 2. Hold down the RESET button for 5 seconds to reset the parameters if you manually changed the network parameters. Q: How to use the microSD card for local storage? A: 1. Make sure there is a microSD card inserted and the camera is added to your EZVIZ account.
