Users Manual

1
Setup
Step 1 Power-on
Plug the power cable into the camera, and then plug the power adapter into an outlet as shown
in the figure below.
Power Cable
Power Outlet
Power Interface
LED Indicator Status
Steady Red: Camera is starting up.
Slowly Flashing Red: Wi-Fi connection has
failed.
Fastly Flashing Red: Device exception (e.g.
MicroSD card error).
Flastly Flashing Blue: Camera is ready for the
Wi-Fi connection.
Steady Blue: Video is being viewed or played
back in EZVIZ App.
Slowly Flashing Blue: Camera is running
properly.
LED Indicator
Turn on the camera and let it power up. The camera will completely rotate side-to-side and
tilt up-and-down once.