User's Manual

3
This Side Up
- In the EZVIZ app, tap the Storage Status in the Device Settings interface to
check the SD card status.
- If the memory card status displays as Uninitialized, tap to initialize it. The
status will then change to Normal and it can store videos.
2. Install the Base
The camera can be placed horizontally or mounted on the ceiling. Here we take
ceiling mounting as an example.
• Make sure the ceiling is strong enough to withstand three times the weight of the
camera.
• Avoid positioning the camera in an area that gets a lot of light shining directly into the
camera lens.
- Place the drill template onto the surface you have chosen to mount the camera.
- (For cement wall/ceiling only) Drill screw holes according to the template, and
insert three anchors.
- Usethreemetalscrewstoxthecamerabase.
Drill Template
Anchors
Metal Screws
3. Install the Camera
Mount the camera to the base, and turn it clockwise until it is fixed.
For detailed information, please refer to www.ezvizlife.com.