User's Manual

2
Setup
1. Power-on
Plug the power cable into the camera, and then plug the power adapter into an
outlet as shown in the figure below.
Power Outlet
2. Connect to the Internet
1. Get the EZVIZ app
- Connect your mobile phone to Wi-Fi.
- Download and install the EZVIZ app by searching “EZVIZ” in the App Store or
Google Play
TM
.
- Launch the app and register an EZVIZ user account.
2. Add camera to EZVIZ
- Log in to your account using the EZVIZ app.
- On the Home screen, tap “+” on the upper-right corner to go to the Scan QR
Code interface.
- Scan the QR code on the Quick Start Guide cover or on the body of the
camera.
- FollowtheEZVIZappwizardtonishWi-Ficonguration.
If you want to change your camera's Wi-Fi, press and hold the reset button for 5s and
repeat the steps above.
Installation
1. Install the Micro SD Card (Optional)
- Rotate the sphere upwards until you see the card slot.
- Insert the Micro SD card (sold separately) into the card slot as shown in the
gurebelow.