Users Manual

3
Step 4
Install the mounting bracket to the junction box with the mounting screws.
1. Take the existing wires of the junction box through the hole of the
mounting bracket.
2. Attach the mounting bracket to your junction box with two
mounting screws.
Mounting Bracket Mounting ScrewJunction Box
3. After installing the mounting bracket to the junction box, the
resulting picture is shown as below.
Step 5
Connect the wires.
Connect the ground wire
1. The copper wire from security light camera is the ground wire .
2. First wrap the ground wire to the green ground screw on the
mounting bracket (make sure the device is grounded), and then
connect it to the existing ground wire of your junction box.
Wire Connector
Green Ground Screw
Connect the power wires
3. Connect the black wire to the black (or hot) wire coming out of your
junction box with a wire connector.
4. Connect the white wire to the white (or neutral) wire coming out of your
junction box with a wire connector.
Wire from Junction box Connect to Matching Wire on Camera
Copper-Ground Copper-Ground
Black-Hot Black
White-Neutral White