Users Manual

2
• Installation height affects motion detection, security light camera recommended installation height: 10 feet (3 m) above the ground.
• Camera recommended setting angle: 20 degree as shown below.
20°
Step 1
Shut off the electricity at the breaker that controls
security light's circuit.
• If you don’t know where your breaker is or how to turn off power to
your oodlight circuit, consult with a licensed electrician.
• Keep the breaker off at any time during the installation process.
Step 2
(Optional) Remove your existing oodlight.
If there is an existing oodlight at the location, disconnect all
wires and remove the existing bracket.
Step 3
Separate the mounting bracket from the security light camera.
1. Unscrew the 2 base screw caps, and pull the security light camera
off the mounting bracket.
Mounting
Bracket
Base screw Cap
2. After separating the mounting bracket from the camera, the
resulting picture is shown as below.
Security Light Camera Installation