User's Manual

4
Limited by PIR detection technology, the camera may fail to detect motion when environment
temperature is close to human body temperature or someone approaches the PIR sensor
vertically.
It is recommended to set detection sensitivity on the EZVIZ app when selecting
location. Thus you can verify if motion can be detected in the camera’s placement
and adjust the sensitivity based on the size and distance of detected object.
Important Notes on Reducing Too Much Alarms:
•
Do not install the camera under strong light conditions, including sunshine, bright lamp
lights, etc.
•
Do not place the cameranearany outlets, including the airconditioner vents, humidier
outlets, the heat transfer vents of projectors, etc.
•Do not install the camera at places with strong wind.
•Do not install the camera in front of a mirror.
•
Keep the camera at least 1 meter away from any wireless devices, including Wi-Fi routers
and phones in order to avoid wireless interference.
2� Installation Steps
The camera can be wall mounted and ceiling mounted.
Ceiling/Wall Mount
1.Pleaseseparatethemountingbaseandthecamerarst.
2.Removetheprotectivelmfromthelens.
3. Drill template onto a clean and flat surface.
4. (For cement wall only) Drill screw holes according to the template, and insert
the anchors.
5.Usescrewstoxthemountingbaseaccordingtothetemplate.
6. Mount the camera to the mounting base.