User's Manual

2
RESET Button
Speaker
POWER Button
Power Port
(Behind the cover)
Name Description
RESET Button Press and hold for about 4s to restart and set all parameters to
default.
POWER Button •Power on: Press and hold for 2s in shut-down state.
•Power off: Press and hold for 4s to power off the camera.
Power Port For charging the camera.
LED Indicator
Slow-flashing Red: Network exception.
Fast-flashing Red: Camera exception (e.g. Micro SD card
error).
Solid Blue: Camera starting up or being live viewed in the
EZVIZ app.
Slow-flashing Blue: Camera working properly.
Fast-flashing Blue: Camera ready for Wi-Fi connection.
Solid Green: Camera fully charged.
Slow-flashing Green: Charging.
Setup
1� Power on the Camera
In the shutdown state, press and hold the POWER button for 2s to power on.
If the camera is out of battery, connect it to power outlet with the power adapter for
charging(5V 2A).
•Both of the power adapter (5V 2A) and solar panel need to be purchased separately.
•Remove the camera from the wall before charging.
•Please do not charge the camera when the temperature exceeds 45 degrees or below
0 degrees.
•It is not allowed to charge the camera with power adapter outdoors.
•When charging, the camera will be automatically turned on.
Charging with solar panelCharging with power adapter