Quick Start Guide

2. Basics

Doorbell

LED Indicator/

Doorbell Button

PIR

Lens

Power Port

Power Button

Terminals

Dismantle Hole

Light Sensor

(Do Not Block)

Name Description

LED Indicator • Solid Red: Less than 20% battery left.

• Slow-Flashing Red: Charging.

• Solid Blue: Person detected or doorbell pressed/fully charged/more

than 20% battery left.

Power Button • Short press for 1 second: Turn on the doorbell.

• Long press for 5 seconds: Turn off the doorbell.

Chime

Antenna

Micro SD Card Slot

RESET Button

LED Indicator

Name Description

LED Indicator • Solid Red: Chime is starting up.

• Fast-Flashing Red: Disconnected from the doorbell or SD card error.

• Slow-Flashing Red: Wi-Fi connection has failed.

• Solid Blue: Chime is functioning properly.

• Fast-Flashing Blue: Chime is ready for Wi-Fi connection.

Reset Button Long press for 5 seconds to restart and all parameters are reset to

default.

Setup

It is recommended to place the chime within 4 meters from where the doorbell is

installed.

1. Power-on

1. Short press the power button for 1 second to turn on the doorbell.

The doorbell beeps once and LED indicator flashes twice, indicating that the

doorbell is turned on.