User's Manual

3
Wiring Overview
EZVIZ doorbell with chime
If you have mechanical chime or electronic chime installed in your home, install the power kit and doorbell, and connect the wires as shown in
the figure below.
16VAC to 24VAC
16VAC to 24VAC
16VAC to 24VAC
110 to 240VAC
LIVE
NEUTRAL
Transformer
Doorbell
Mechanical Chime / Electronic Chime
Power Kit
Coil of the door chime
0
3
EZVIZ doorbell with no chime
If no chime is installed, skip power kit installation, install the doorbell, and connect the wires as shown in the figure below.
Fuse Wire
16VAC to 24VAC
16VAC to 24VAC
110 to 240VAC
LIVE
NEUTRAL
Doorbell
Transformer
•We recommend installing a new transformer to bring the output 16 to 24 volts.
•Please refer to Quick Start Guide of your chime or transformer for the chime or transformer installing details.
Power Kit Installation
The power kit ensures that your doorbell gets the power it needs, so be sure to install it before you install your Doorbell.
1
Shut off the electricity at the breaker that controls doorbell's circuit.