User's Manual

5
2� Install Micro SD Card (Optional)
- Turn up the Cover on the camera.
- InsertaMicroSDcard(soldseparately)intothecardslotasshowninthegurebelow.
- Place the cover back on.
Turn up the Cover
After installing the Micro SD card, you should initialize the card in the EZVIZ app before using it.
- In the EZVIZ app, tap the Record List in the Device Settings interface to check the SD card status.
- If the memory card status displays as Uninitialized, tap to initialize it.
The status will then change to Normal and it can store videos.
3� Installation Steps
1. Please separate the mounting plate from the screw baserst.
Mounting Plate Screw Base
2. Removetheprotectivelmfromthelens.
3. Placedrilltemplateontoacleanandatsurface.
4. (For cement wall only) Drill screw holes according to the template, and insert anchors.
5. Usescrewstoxthemountingplateaccordingtothetemplate.
6. Rotate the screw base to the mounting plate.
7. Mount the camera to the base.
Mounting Plate
Anchor
Drill Template
Screw
Screw Base
Camera