User's Manual

Micro SD

After installing the micro SD card, you should initialize the card in the EZVIZ app

before using it.

4. In the EZVIZ app, tap the Storage Status in the Device Settings interface to

check the SD card status.

5. If the memory card status displays as Uninitialized, tap to initialize it.

The status will then change to Normal and then videos can be stored.

2. Installation Location

• Choose a location with a clear, unblocked eld of view and with a good wireless

signal.

• Make sure the wall is strong enough to withstand three times the weight of the

camera.

• Camera cannot be installed with the lens facing direct sunlight.

3. Installation Procedure

1. Remove the protective lm from the lens.

2. Stick the drilling template onto a clean and at surface.

3. (For cement wall only) Drill screw holes according to the template, and insert

anchors.

4. Use screws to x the camera on the installation surface.