User's Manual

5
2� Remove the shell (Optional)
• The device shell is made of food-grade silica gel. Please rest assured that it does not need high-temperature cooking
and disinfection or the magnetic effect might be affected.
• Don't remove the shell. If you must remove the shell, please follow the tips below.
Don's
Push the device body backward from the
front end of the shell.
Do's
Push the device body forward from the
rear end of the shell.
4� Install the shell (Optional)
Don's
Insert the rear part of the device body from
the front end of the shell until it is installed
properly.
Do's
Insert the front part of the device body
from the rear end of the shell until it is
installed properly.