User's Manual

4
3� Add Camera to EZVIZ
- Press and hold the reset button on the camera for 4 seconds. When the LED indicator ashes blue quickly, indicates that the
camera is ready for Wi-Fi conguration.
- Log in to your account using the EZVIZ app.
- On the Home screen, tap “+” on the upper-right corner to go to the Scan QR Code interface.
- Scan the QR code on the Quick Start Guide cover or on the body of the camera.
- Follow the EZVIZ app wizard to nish Wi-Fi conguration.
If you want to change your camera's Wi-Fi, press and hold the reset button for 4 seconds and repeat the steps above.
Camera Installation
Do not install the camera more than 6.6 ft (2 m) above the ground to avoid being injured..
1� Install Micro SD Card (Optional)
- Insert the Micro SD card (sold separately) into the card slot as shown in the gure below.
After installing the Micro SD card, you should initialize the card in the EZVIZ app before using it.
- In the EZVIZ app, tap the Storage Status in the Device Settings interface to check the SD card status.
- If the memory card status displays as Uninitialized, tap to initialize it.
The status will then change to Normal and it can store videos.