Instructions

2
1
Shut off the electricity at the breaker that controls
doorbell's circuit.
2
Insert one end of the wire harness the power kit.
3
Remove the cover from your mechanical chime.
4
Remove the existing chime wires in the terminals
named TRANS and FRONT.
TRANSF RONTREAR
REAR
Power Kit Installation
•If you have mechanical chime installed in your home, install the power kit and doorbell.
•If you have electronic chime installed in your home, refer to its own manual to install the power kit, and install the
doorbell.
•If no chime is installed, skip power kit installation, install the doorbell and follow the Option B in page 5.