Instructions

4
Recommended Installation Height: 1.2 m (4 ft) above the ground.
1
Shut off the electricity at the breaker that controls
doorbell's circuit.
2
(Optional) When the wall is uneven, paste the plate
foam to the mounting plate.
3
Insert the mini-level into the mounting plate and mark
the drill points when its bubble stays in the middle.
Mini-Level
Remove the mini-level when drill points are marked.
4
Drill holes according to drill points and insert anchors.
Anchor
Recommended Hole Depth: 25 to 30 mm (1 inch to 1.2 inch).
Doorbell Installation