Instructions / Assembly

ManualsBrandsEZSMART ManualsTools & HardwareUniversal Saw Base

Eurekazone, LLC 1904 NE Jacksonville Rd Ocala, FL 34470

Phone (352) 620-2262 Fax (352) 620-2576 techsupport@eurekazone.com www.eurekazone.com

Note: Upon opening your Package, please identify all parts as detailed on Page 2 of

this instruction manual.

The Smart Saw Base can be attached to virtually any standard-size right-blade or left-blade circular saw.

When used for free hand cuts, the features of the base provide for chip-free cuts on both sides of the blade

while preventing “kick-back” by way of the fin that keeps the kerf open during the cut. These features are

also employed when the base is used in conjunction with the optional EZ SMART Guide Rail

Prior to installing your Smart Saw Base, please ensure that you have read and fully understand these

instructions and those provided for any power tools that you may use during this installation. Disconnect

your saw from the power supply while completing this installation. When required, use hearing and eye

protection. A video detailing these installation procedures is available, please visit our website at

Eurekazone.com and navigate to the “Product Assembly Instructions” main page.

Holes for attaching

the Universal Edge

Guide* connectors

SMART SAW BASE

v20-01

Right-Blade: Slot for Fin Insert

Left-Blade: Slot for Anti-Chip Inserts

Blade Alignment Tabs

Right-Blade: Slot for Anti-Chip Inserts

Left-Blade: Slot for Fin Insert

Inside track for

90 degree cuts

Outside track

for bevel cuts

Summary of content (6 pages)

PAGE 1
SMART SAW BASE The Smart Saw Base can be attached to virtually any standard-size right-blade or left-blade circular saw. When used for free hand cuts, the features of the base provide for chip-free cuts on both sides of the blade while preventing “kick-back” by way of the fin that keeps the kerf open during the cut.
PAGE 2
SMART SAW BASE PARTS LIST **Please identify all parts prior to installation ** QTY 1- Smart Saw Base (SB-1) QTY 1 - Flat Insert (AC-1) – Used when Making Free Hand Cuts and with the UEG QTY 1- On Rail Insert (SB-AC-2-R) – For right blade saw when base is placed on the optional EZ Smart Guide Rail QTY 1- On Rail Insert (SB-AC-2-L) for left blade saw when base is placed on optional EZ Smart Guide Rail QTY 1- Fin Insert (SB-L&R) used on both right and left blade saws to accommodate the fin QTY 1- Fin (SB-F
PAGE 3
ATTACHING THE SAW St ep 1 Place front of saw plate against the front of the Smart Saw Base Front St ep 2 Line up body of blade to the ends of the Alignment Tabs RIGHT-BLADE SAW LEFT-BLADE SAW St ep 3 Using the pre-drilled holes in the Saw Base as a guide, drill holes into the saw plate Not es ● ● ● ● Smart Saw Base can be held in place by double-sided tape or with small clamps prior drilling Attach the saw to the Smart Saw Base using the supplied screws and nuts.
PAGE 4
ANTI-CHIP INSERTS A key feature of the Smart Saw Base is the interchangeability of the anti-chip inserts which provide for chip-free surfaces on both sides of the blade . The flat insert (AC-1) is used for free hand cuts, acting as a “zero- clearance” for your saw when attached to the Smart Saw Base, and is best used in conjunction with the Fin Insert (SB-L&R) and Fin (SB-F) to provide “anti-kickback”.
PAGE 5
ANTI-KICKBACK FIN The Anti-Kickback Fin is essential in helping to reduce the potential for kickback when using your circular saw for free hand cuts The Anti-Kickback Fin follows the kerf to keep the material from binding. It also assists with guiding the saw to ensure a straight cut.
PAGE 6
SAW BASE IN USE LEFT-BLADE SAW RIGHT-BLADE SAW Using the Anti-Kickback Saw Base with the Guide Rail Fin acting as splitter during the cut Using the Anti-Kickback Saw Base with the Universal Edge Guide AC-1 Insert being used Eurekazone, LLC 1904 NE Jacksonville Rd Ocala, FL 34470 Phone (352) 620-2262 Fax (352) 620-2576 techsupport@eurekazone.com www.eurekazone.