User manual

Troubleshooting

No. of

blinks

Explanation Solution

8 Hall sensor in motor

faulty

One or more hall sensor disconnected or faulty.

Check connector at the front fork. If connector

is OK, contact your eZee dealer

9 Supply 3 phase wire Check phase wires at the front fork. Contact your

eZee dealer

10 Controller overheating Motor continue to function but the amps directed

will be lessened to reduce the load and cool

controller

11 Thermostat faulty the motor will continue to work, but extreme

temp. arise without thermostat protection may

damage controller - Replace controller

12 Controller failure Motor does not work - Replace controller

2+3 Controller failure Motor does not work - Replace controller

3+4 Stalled motor Extremely overload stalling motor, switch off and

on – reboot

3+5 Supply 3 phase wires Inspect cable and connector for dislocation or

damage. Diagnostic appears during throttle us-

age.

No Light Power supply faulty /

Controller failure

Inspect battery and power connections for dam-

age / Replace controller

The faults listed may not cover every possible failure. In the

event of moisture or water entering the controller, haphazard

signals might appear. We’ve designed the eZeebike to repel water

as much as possible, encapsulating circuit boards with silicone

resins and connections with silicone grease.

Since this manual simply cannot cover every detail that

might occur during the lifetime of your product. Check our websites

and dealers website routinely for updates, or contact us directly for