Owner`s manual

015885 rev 10-00

OPERATOR QUALIFICATIONS

Operation of this unit shall be limited to competent and experienced persons. In order to be

qualified, he must also know and meet all other requirements, such as, but not limited to,

the following:

1. Some laws and regulations specify that no one under the age of 16 years may operate

power machinery. It is your responsibility to know what these requirements are in your

own area or situation.

2. Current OSHA regulations state in part: “At the time of initial assignment and at least

annually thereafter, the employer shall instruct every employee in the safe operation and

servicing of all equipment with which the employee is, or will be involved”

3. Unqualified persons are to stay out of the work area.

4. A person who has not read and understood all operating and safety instructions is not

qualified to operate the machine.

Federal Occupational Safety & Health Standards for Agriculture

Subpart D. Section 9128.57 (a) (6).

OSHA

OCCUPATIONAL SAFETY AND HEALTH ACT OF 1970

Certain purchasers of our products may be subject to the requirements and standards of the

William-Steiger Occupational Safety and Health Act of 1970, which prescribes standards

for use of appurtenances of our manufacture, such as handrails, platforms, stairways, fixed

ladders, ladder cages, and guard rails. (Occupational Safety and Health Standards Section

1910.21

through 1910.32). Before installing these devices, familiarize yourself with the

above Federal Standards.

At the time of manufacture, these

optional

items conform to applicable standards.

MFS/

YORK/STORMOR assumes no liability with respect to proper constructed, inspection,

assembly, or use of its products under applicable laws, all of which is the sole

responsibility of the purchaser and those doing the assembly work.

Safety and operational decals as shown on the next two pages are installed on your Ezee

Dry bin in the locations indicated. Be sure all of these decals are in their proper location on

the bin and are in good condition. Check all safety decals and replace any that are worn,

missing, or illegible. They may be ordered as any other part is ordered. See your dealer for

additional information or contact the Factory direct at the address listed on the back cover of

this manual.