Owner`s manual

015885 rev 10-00

Bin Hardware, cont’d

3/8” x 1” Hex bolts, flat washers and nuts

Used to assemble the fan platform

Used at the winch on batch units

1/2” x 1” Hex bolts

Used to bolt the center collar to the support channels

1/2” x 1 1/2” Hex bolts, flat washers and nuts

Used to bolt the plenum rafters to the tension angle and center collar

1/2” x 2” Hex bolts, lock washers and nuts

Used at the pulleys

1/2” x 10” Anchor bolts, washers, nuts

Used to secure the bin to the foundation

Sealer tape

Used on bin wall seams (one strip vertically and 6-12” horizontally)

Used both vertically and horizontally around door frame

Roof eave clip

Attaches the top ring of the sidewall sheets (place on the outside). The top set of holes

puts the roof in a lowered position for a storage application and the bottom set puts the

roof in a raised position to facilitate drying.

Roof Cap hardware

Roof cap slide rod bracket

Roof cap hold down bracket

Roof cap slide rod tab

Roof manhole hardware

Manhole hinge

Manhole hinge bracket

Manhole latch catch

Manhole latch slide

Manhole latch bushing

Door Hardware

Outer door clip

Striker plate

Door T-handle

#8 x 3/8” screw

#8 external tooth lock washer

#8-32” hex nut

1/4” x 1/2” Hex bolt and flange nuts

UNDER NO CIRCUMSTANCES SHALL ANY OTHER BOLT

BE SUBSTITUTED FOR THOSE SUPPLIED BY

MFS/YORK/STORMOR