Owner`s manual

015886 5-02

Put on sidewall sheet bundles before shipped.

If augers manufactured by others

are installed in conjunction with your

bin, we strongly recommend that

this or a similar decal be installed in

a visible location on that equipment

if not present.

Located on the inside of the manway lid and on the

inside of the outer door cover.

Decal I.D. & Placement

Located on the inner door panel. CAUTION

THIS BIN IS LIMITED TO ONE OF THE FOLLOWING USAGES AS LISTED BELOW - IMPROPER USAGE WILL

VOID ANY STATED WARRANTY APPLICABLE TO THIS PRODUCT.

S - DESIGNATES STORAGE BIN: D - DESIGNATES DRYING BIN H - DESIGNATES HEAVY DUTY BIN

SITUATION S D H

MAXIMUM UNLOAD RATE (Bushels per hour) 2,500 7,500 15,000

SUPLEMENTAL HEAT ALLOWED NO YES YES

MAXIMUM AIR FLOW IN CUBIC FEET PER MINUTE PER

BUSHEL GRAIN 1/5 3 7

MAXIMUM ALLOWABLE MOISTURE CONTENT IN PERCENT-

AGE POINTS ABOVE USDA DRY GRAIN STANDARDS 3 15 Greater than 15

MAXIMUM LOAD/UNLOAD FREQUENCY PER YEAR 2 4 8

STIRRING DEVICES:

36’ DIAMETER AND SMALLER NO YES YES

42’ DIAMETER AND LARGER NO YES-2 Augers or less YES

CONICAL HOPPER UNDER BIN ALLOWED NO NO YES

APPROVED FOR SEISMIC LOAD NO NO YES

RECIRCULATING/CONTINUOUS FLOW DRYER ALLOWED NO NO YES

SEE YOUR CONSTRUCTION/SAFETY MANUAL FOR STANDARD WARRANTY AND OTHER SPECIFICATIONS.

mfs018036

Your Ezee Dry bin has load carrying capa-

bilities and restrictions that are equivalent

to those listed for the Drying Bin.

Located on the inside

at the outer door cover.