Owner`s manual
015886 5-02
7
OPERATOR QUALIFICATIONS
Operation of this unit shall be limited to competent and experienced persons. In
order to be qualified, he / she must also know and meet all other requirements,
such as, but not limited to, the following:
1. Some laws and regulations specify that no one under the age of 16 years
may operate power machinery. It is your responsibility to know what
these requirements are in your own area or situation.
2. Current OSHA regulations state in part: “At the time of initial assignment
and at least annually thereafter, the employer shall instruct every employee
in the safe operation and servicing of all equipment with which the
employee is, or will be involved”
*
3. Unqualified persons are to stay out of the work area.
4. A person who has not read and understood all operating and safety
instructions is not qualified to operate the machine.
*
Federal Occupational Safety & Health Standards for Agriculture
Subpart D. Section 9128.57 (a) (6).
OSHA
OCCUPATIONAL SAFETY AND HEALTH ACT OF 1970
Certain purchasers of our products may be subject to the requirements and
standards of the William-Steiger Occupational Safety and Health Act of 1970,
which prescribes standards for use of appurtenances of our manufacture, such
as handrails, platforms, stairways, fixed ladders, ladder cages, and guard
rails. (Occupational Safety and Health Standards Section 1910.21 through
1910.32). Before installing these devices, familiarize yourself with the above
Federal Standards.
At the time of manufacture, these optional items conform to applicable
standards. MFS/YORK/STORMOR assumes no liability with respect to proper
construction, inspection, assembly, or use of its products under applicable
laws, all of which is the sole responsibility of the purchaser and those doing
the assembly work.
SAFETY AND OPERATIONAL DECALS
Safety decals as shown on page 9 are installed on your Ezee Dry bin in the
locations indicated. Be sure all of these decals are in their proper location on
the bin and are in good condition. Check all safety decals and replace any
that are worn, missing, or illegible. They may be ordered as any other part is
ordered. See your dealer for additional information or contact the factory
direct at the address listed on the back cover of this manual.