Owner`s manual

015886 5-02

Operation

Prior to filing your new bin for the first time, you should check the following:

1. All bolts are in place and properly tightened.

2. All ladders, handrails, stairways are securely in place.

3. The bin has been properly anchored to the foundation.

4. Unloading equipment operates freely and all control gates are operable.

5. The inner door panels of the sidewall door should be tightly closed.

6. The sweep arm of built-in sweep systems is positioned over the

intermediate sumps.

7. The working areas around the bin are clean and free of clutter.

8. All guards and shields are in place.

NOTE: Refer to the installation and operations manual of the control panel

for information pertaining to the actual drying operation of the Ezee Dry.

read the operations manual

READ AND UNDERSTAND YOUR

OPERATIONS MANUAL PRIOR TO

ATTEMPTING TO USE THE EZEE

DRY BIN. FOLLOW ALL OF THE

SAFETY ADVISORY INFORMATION

FOUND IN THE CONSTRUCTION

AND OPERATOR’S MANUALS.

Contact the Engineering Department

of MFS/YORK/STORMOR with ANY

questions at (308) 384 - 9320.