Owner`s manual

015886 5-02
6
Important Safety Information
This MFS/YORK/STORMOR Construction/Safety Manual is written to assist
and instruct those who are responsible for the complete Ezee Dry assembly,
and for anyone using the Ezee Dry once assembled.
MFS/YORK/STORMOR assumes no liability with respect to proper
construction and inspection, assembly, or use of its products established under
applicable laws, all of which is the sole responsibility of the purchaser and
those doing the assembly work.
Appurtenances and the accessories manufactured by us for use with our products
conform only to applicable Federal or Safety Standards in effect at such time.
GENERAL SAFETY STATEMENT
Occupational safety is of prime concern to us at MFS/YORK/STORMOR. This
manual was written with the safety of the operator or others who come in
contact with the equipment as our prime concern. The manual presents day to day
work problems encountered by the operator and other personnel. We wrote this
manual to help you to better understand how to safely build and use this Ezee Dry.
It is your responsibility as an owner or operator or supervisor, to know what
specific requirements, precautions, and work hazards exist and to make these
known to all other personnel working with the equipment or in the area, so
that they too may take any necessary safety precautions that may be required.
Failure to read this Manual and its Safety Instructions by all personnel is a
misuse of the equipment. We want you as our partner in safety.
Watch For This Symbol! It Points Out Important Safety Precautions.
It Means “ATTENTION” - Become Alert! Your Safety Is Involved!
WORK AREA SAFETY STATEMENT
Under no circumstances should persons not involved in the operation be
allowed to trespass into or be present in the work area.
It shall be the duty of all operators to see that children and/or other persons stay
out of the work area! Trespass into the work area by anyone not involved in the
actual operations, or trespass into a hazard area by anyone, shall result in an
immediate shut down by the operator.
It shall be the responsibility of all operators to see that the work area has
secure footing and is clean and free of all debris and tools which might cause
accidental tripping and/or falling. It shall also be their responsibility to keep
the work area clean and orderly during the operation.