Owner`s manual

55
015886 5-02
44
install the final stiffener(s)
When nearing the completion of the
sidewall a unique set of stiffeners is
provided for use at the bottom of the
sidewall. Install these bottom stiffeners
as shown (fig.s d and e). For even
ringed bins follow figure d. For odd
ringed bins follow figure e.
EVEN RING BIN BASE STIFFENERS
d
short 43 11/32”
base stiffener
(connects to
base angle
and plate)
base angle
vertical
sidewall seam
vertical
sidewall seam
(bolt on the
stiffener at
the seam)
68 15/16” long
intermediate
z-bar stiffener
(swaged end
is always at
the top)
5/16” flange
nuts used
at stiffeners
5/16”
standard nuts
ODD RING BIN BASE STIFFENERS
e
68 15/16” long
intermediate
z-bar stiffener
(swaged end
is always at
the top)
vertical
sidewall seam
(bolt on the
stiffener at
the seam)
short 36 15/16”
intermediate
stiffener (2nd
stiffener from
the bottom on
odd ring bins)
vertical
sidewall seam
(bolt on the
stiffener at
the seam)
short 43 11/32”
base stiffener
(connects to
base angle
and plate)
base angle
5/16” flange
nuts used
at stiffeners
5/16”
standard nuts