Owner`s manual

41
015886 5-02
25
install the safety ring and flashing
In addition to the top row of rib bolts,
leave out every fourth bolt from the
third row of rib bolts for the safety
ring. Add the safety ring to the roof
using the single hole clamps provided
(fig. f). Join the three safety ring
sections with a connector. Fasten the
(6) six roof cap flashing pieces.
VACUVENT ASSEMBLY
e
vac - u - vent panel
5/16” x 1 1/4”
bin bolt with nut
(thru s-hook & bin wall typ.)
control pipe
bin sidewall
vac - u - vent chain
assembly (2 req’d)
aprox. 12” long
vac - u - vent angle
5/16” x 1 1/4”
bin bolt with nut
5/16” x 3 1/2” bolt and neoprene washer
vac - u - vent panel
1/2” x 3” vac - u - vent spring
5/16” flanged nut
BOLT VAC-U-VENTS TO RIBS
d
flashing detail
ADD THE SAFETY RING AND ROOF CAP FLASHING
f
roof section shown
roof cap flashing
peak ring
safety ring
one hole clamp (1 every 4
roof sheets as shown)
connector
flashing
roof cap