Owner`s manual

015886 5-02

secure center cone to the peak

Set the perforated center cone in place

and fasten it to the perforated skirt using

self-tapping screws (fig. a).

fasten the perforated skirt sections

Bolt the 14 gage perforated skirt sections

to the main trusses above the plenum

sheets using the holes provided (fig. b).

After the skirt sections are bolted to the

trusses at the lap seams locate and drill

the remaining (rib/skirt connection)

holes through the skirts. It is important

that all 72 bolts are installed through

the perforated skirt into the trusses.

FASTEN THE PERFORATED SKIRT SECTIONS TO THE TRUSSES

14 gage perforated

skirt (12 pcs.)

NOTE: for clarity not all trusses

or plenum sheets are shown.

center collar

plenum sheet

truss

field drill 3/8” holes

to connect skirt

with rib holes

field drill

plenum sheet

If you are using a center jack which projects through the center collar

we recommend waiting to do step 18 until the bin roof is complete

(the uppermost or standard roof).

USE SCREWS TO PUT ON THE CENTER CONE

center cone

perforated skirt

fasten on with self

tapping screws