Owner`s manual

32
015886 5-02
11
attach truss skirts from underneath
Bolt the four 10 gage skirt sections to
the underneath side of the trusses at the
peak as shown in fig. a. It is important
that all 48 bolts are installed through
the 10 gage skirt!
12
attach the pulley mounting angle
Bolt on the pulley mounting angle to the
center collar as shown (fig. b).
ATTACHING THE TRUSS SKIRT FROM BELOW
a
truss
skirt
center collar
truss
5/16” x 1”
bolts
and nuts
NOTE: for clarity not
all trusses are shown.
INSTALL DUMP HOPPER CHUTES
c
plenum sheet
dump chute
s hook double nut
BOLT THE PULLEY MOUNTING ANGLE TO THE CENTER COLLAR
b
center collar
truss
truss skirt
pulley
mounting angle
5/16” x 1”
bolt
NOTE: for clarity not
all detail is shown
If you are using a center jack which projects through the center collar
we recommend waiting to do step 12 until the bin roof is complete (the
uppermost or standard roof).