Owner`s manual

11
015886 5-02
Specifications
This bin is designed along guidelines which allow it to provide the owner
years of service provided it is not used for purposes for which it was not
intended. The sidewall gage specifications for your bin appear in the sidewall
sheet layout information on pages
26 and 59. The general material
specifications for your bin are as follows:
WALLS
All wall sheets are of corrugated, galvanized steel with 2.66" corrugation.
Wall sheets have .90 oz. per square foot zinc coating (G-90 designation).
2.66" corrugation sheets have 32" vertical coverage.
Horizontal coverage of wall sheets is 112 1/2".
All 5/16" bolts are electro-galvanized grade 8.2 with self-sealing injection
molded washers.
Sealer strip is provided to seal all vertical sidewall seams.
Base Sealer is provided to seal between the bin and the concrete foundation.
Anchor Bolts are standard with all Ezee Dry bins.
STANDARD ROOFS
All single span sheets are made of 22 gage galvanized steel and have a 36”
opening at the peak with a 2 1/4” rib height.
One manhole roof sheet is standard on each bin. A hinged lid is also included
with an opening size of 3.7 square feet.
A roof ladder from the eave to the peak and a roof safety ring is standard
with each bin.
Steep 32º roof slope.
There are 36 sheets per roof.
Roof sheets are attached to sidewalls with specially designed eave clips.
Loading:
Live Load - 25 pounds per square foot Concentrated Peak Loading:
Dead Load - 3 pounds per square foot 2000 pounds
Wind Load - 20 pounds per square foot