User Guide

How to Plug and Play (via USB cable)
Android
iOS
1. Select Android on main menu of the projector, and then
select Plug and Play by pressing "OK" key.
2. Connect your mobile to the projector via mobile USB data
cable.
3. Download and install MiraPlug app.
4. Replug the cable and it will start casting automatically.
1. Select the iOS on main menu of projector, and then select
Plug and Play menu by pressing "OK" key.
2. Connect your mobile to the projector via mobile USB data
cable, and then choose "Trust This Computer" to start your
projection.
Note: If there’s a black screen after connecting to mobile,
please reboot your mobile and then try again.