Instructions / Assembly
18
Section-11
Flex Light Pipe Installation
(2) 2-1/2” Pan Head Sheet
Metal Screws (Not Included)
3/32” Bit
Drill
Phillips Drill Bit
TOOLS & PARTS
Before going onto roof, cut the flex light pipe to length
needed from top of flashing to diuser assembly. Install
one end of the flex light pipe onto the top section of the
rigid light pipe up to the flange. Secure with the flex pipe
with the hose clamp provided.
Flex Light Pipe Installation
For flex pipe installation, use steps listed below, referring to
those listed on previous pages for more specific install data.
On the roof, install the top section of the rigid light
pipe with attached flex pipe through the opening of
the flashing. The flange of the rigid light pipe should
rest on top of the flashing. Secure with self taping
screws provided.
In the attic, stretch the flex light pipe as taught as
possible. Secure the flex light pipe onto the bottom
section of rigid light pipe with the hose clamp provided.
Secure the bottom section of rigid light pipe into the
ceiling ring assembly such that the tabs lock it into place.
Extension Tube(s)
1
2
3