and JB-1.XL Instruction Manual

• System Marking: Intertek Symbol and File # 5019942
• Periodic Re-inspections: If re-inspections yield loose components, loose fasteners, or any corrosion
between components, components that are found to be affected are to be replaced immediately.
NOTE: SAVE THESE INSTRUCTIONS
This manual contains important instructions that shall be followed during installation and maintenance of the system. This manual
should be stored near the product’s installation and must be available at all times. This product is intended for operation in an
environment having a maximum temperature of 75°C.
This product is only to be installed by qualified personnel. These installation instructions are for qualified personnel only and the
instructions herein are provided for those individual(s) only. To reduce the risk of electric shock, injury or death, all wiring and connec-
tions must be performed by qualified personnel. Do not perform any installation or service other than that to which you are qualified to
perform. Protect you and all persons and property during installation and servicing of this equipment.
If you have any doubt concerning your competence or expertise, consult a qualified expert to perform the installation.
WARNING! STOP IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS AND SAFETY WARNINGS PRIOR TO INSTALLATION