Installation Guide

10. Insert Top 5 Tubes into both Tube Receivers. Do not insert hanging tube (Bottom of “L”) until step 13.
Twist both ends of tubes until fully seated.
11. Place Center Support so the tubes rest in the slots (preferably thicker part of tubes) & mark holes on back
wall.
12. Attach Center Support (see 5-9 above) to back wall using anchors and screws. Note: Not all products
include Center Supports. Garage Shelves include two Center Supports. Extra Center Supports may be
purchased if needed.
13. Insert Tube for Hanging Rod into both Tube Receivers. – DONE EZ!!
Helpful Hints:
1. Two shelves can be attached to each other by snapping a right Tube Bracket into one side of an End
Bracket and a left Tube Bracket into the other side of the same End Bracket and securing with included
nuts/bolts.
2. For great looking corners, extend one shelf all the way to the wall, and mount an end bracket next to
the first shelf to begin your second shelf.
Note: DO NOT rest
Center Support on
tube extension
sleeves.
Left, Right: Joining two
shelves together with an
End Bracket
Below: Two shelves
make a corner with 1 End
Bracket
Need more help?
Phone: [phone]
Email: [e-mail]