Installation Guide

ManualsBrandsEZ Shelf ManualsCloset OrganizationEz shelf expandable shelving 8-ft x 12-in White Fixed Mount Wire Shelf

Table Of Contents

If you have ANY issue, please do NOT return product.

We Will Resolve ALL Problems.

If you have any questions, missing parts or need any

design or installation help, we are open 7 days/week

- please call our office 888-399-2880.

Calls after 8PM EST will be called the next morning.

Or email or call David Jablow, President

djablow@ezshelf.com Cell 908-625-8882

Please consider leaving a product review

and let us know how we are doing.

Thanking you in advance,

The Ez Shelf Team

David, Jill,

Myke, and Carmen

601 N. Congress Ave., Unit 606

Delray Beach, FL 33445

888-399-2880

www.EzShelf.com

We are a small company and take great pride in our

products and service. We care about our customers!

Summary of content (5 pages)

PAGE 1
601 N. Congress Ave., Unit 606 Delray Beach, FL 33445 888-399-2880 www.EzShelf.com If you have ANY issue, please do NOT return product. We Will Resolve ALL Problems. If you have any questions, missing parts or need any design or installation help, we are open 7 days/week - please call our office 888-399-2880. Calls after 8PM EST will be called the next morning. Or email or call David Jablow, President djablow@ezshelf.
PAGE 2
WATCH Installation Videos at www.EzShelf.com BEFORE Installation PLEASE CHECK ALL PARTS against Packing Slip PRIOR to Installation Molded 2 Tube Receivers Center Left Receiver - Small Hole Support Parts End Bracket(s) End Brackets NOT included in all kits. May be bought separately.
PAGE 3
Mounting Tube Receivers to Sidewall 1. Measure & Mark Sidewall from floor up Suggested Shelf Heights: measure longest shirt or other item from bottom to inside top of hook Single Hanging: 60” - 80” from floor to top of Hanging Bar (not top of shelf). Double Hanging: 80” - 84” from floor to top Hanging Bar & 40” - 42” for bottom shelf. 2. Tape Tube Receiver Template to sidewall – Must be Level. 3.
PAGE 4
5. Repeat steps 2 through 7 for second Tube Receiver on opposite wall. 6. Before Inserting Tubes into Tube Receivers (Plugs on Tubes have very Tight Fit) Coat Plugs with Vaseline, or Vegetable Oil & Coat Plugs-helps put Tubes completely into Receiver. 7. Insert Tubes, using mallet to tap in and/or twisting the tubes on both ends until fully seated. If installing multiple units skip this step until after all shelves have been installed. 8.
PAGE 5
Important Note: If installing into a tight space where tubes will be barely extended or not extended, insert ALL tubes into both Tube Receivers during this step. The tubes will NOT fit into a tight space once the brackets are mounted to the wall. 14. Follow Steps 5-7 above to attach End Bracket to wall. 15. If using another End Bracket, measure the same distance from the floor as the first End Bracket and tape the Template on the wall.